Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post

IsaacCarlson · 07-23-2009, 07:31 PM

about 350 STINKIN POUNDS OF TOOLS!!!!!!!!! talk about sluggish, man! It took a lot longer to get to 50 than normal. and the back end was definitely lower and very rolly. but now that i have removed all of the chrome and steel, its a LOT better. ill give you the rough list.

1 steel trolley jack
1 set of wrenches from 5/32 to i think 1 7/8
1 set of wrenches from 5mm to 34mm
1 24 inch crescent wrench and multiple smaller ones (total of about 6)
2 1/2 inch torque wrenches
1 set of lug sockets
files
gear pullers
several sets of regular sockets
ratchets, tiedowns, etc
10 or 15 screwdrivers
1 tub of wheel bearing/brake grease
1 24 inch 1/2 drive breaker bar
and of course the SPARE
Well, you get the picture. HEAVY
and i didn't realize i left it all in there 4 days ago! go figure.

07-23-2009, 07:31 PM	#10 (permalink)
IsaacCarlson eco....something or other Join Date: Jul 2009 Location: Colfax, WI Posts: 444 wood hauler - '91 F-250 90 day: 22.06 mpg (US) Thanks: 27 Thanked 15 Times in 11 Posts	I'll tell you what WAS in my trunk as of 1 hour ago... about 350 STINKIN POUNDS OF TOOLS!!!!!!!!! talk about sluggish, man! It took a lot longer to get to 50 than normal. and the back end was definitely lower and very rolly. but now that i have removed all of the chrome and steel, its a LOT better. ill give you the rough list. 1 steel trolley jack 1 set of wrenches from 5/32 to i think 1 7/8 1 set of wrenches from 5mm to 34mm 1 24 inch crescent wrench and multiple smaller ones (total of about 6) 2 1/2 inch torque wrenches 1 set of lug sockets files gear pullers several sets of regular sockets ratchets, tiedowns, etc 10 or 15 screwdrivers 1 tub of wheel bearing/brake grease 1 24 inch 1/2 drive breaker bar and of course the SPARE Well, you get the picture. HEAVY and i didn't realize i left it all in there 4 days ago! go figure. __________________ 1991 F-250: 4.9L, Mazda 5 speed, 3.55 10.25" rear.