Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post - Paul & Sabrina's cheap DIY 144v motor controller

adamj12b · 11-21-2009, 10:21 PM

Hey guys,

Ive been working hard over the past couple months or so on a surface mount version of the control board. This board includes the infamous Pre-charge circuit and a bus voltage measurement circuit.

I have also modified my driver board design to improve on some little things I found with my first version. These are also surface mount so they can be assembled on machines, but i also added through hole pads so I could assemble them by hand if I wanted.

Well Im tired. Here are some pictures!!!

-Adam

EDIT: I forgot to mention, These will be populated Saturday December 5th!!

11-21-2009, 10:21 PM	#2620 (permalink)
adamj12b Master EcoModder Join Date: Apr 2009 Location: Charlton MA, USA Posts: 366 EVVette - '71 Corvette Coupe Thanks: 20 Thanked 122 Times in 65 Posts	Hey guys, Ive been working hard over the past couple months or so on a surface mount version of the control board. This board includes the infamous Pre-charge circuit and a bus voltage measurement circuit. I have also modified my driver board design to improve on some little things I found with my first version. These are also surface mount so they can be assembled on machines, but i also added through hole pads so I could assemble them by hand if I wanted. Well Im tired. Here are some pictures!!! -Adam EDIT: I forgot to mention, These will be populated Saturday December 5th!! __________________ www.EVVette.com - 1971 Corvette Coupe Conversion to all Electric! www.AdamBrunette.com - Machining, CNC, Robotics and Electronics. Last edited by adamj12b; 11-21-2009 at 10:49 PM..