I didn't feel like waiting for GiviUSA to get the rack for my B33 trunk so I made one myself out of 1"x1/8 aluminum angle. The bolts are m8x1.25 by 65 mm long. The spacers are aluminum tube 39 and 34 mm long. The PCX tail piece is marked on the inside for the cut outs. Cut away the plastic webbing from the universal plate as shown for the first bolt hole. The B33 case looks nice and is aero enough so as not to make any difference to reaching the limited top speed but is a little small for a backpack with a laptop. I may have to spring for a larger case and just use this one for it's good looks, and as a back rest and to hold the second jacket and helmet of a passenger.
.
.
.