Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post

Xringer · 07-14-2008, 01:24 AM

But, I'm wondering why you have them cut out in the bottom (around the center area).?.
Almost all the skirts I've seen were flat across the bottom..

I think Coroplas might be the better way to go. It's much lighter than acrylic/Plexiglas(?).
If that stuff were to fly off the car, it might not be something anyone would want hit or be hit by..
Whereas a piece of Coroplas weighs about the same as cardboard..

I have two pieces of blue Coroplas one is 2x4 feet and the other is
about 24x32 inches. I used some for an airplane tail..

http://i46.photobucket.com/albums/f1...PA32D/d0ce.jpg
It looks a little lighter blue in this pic..

Anyways, if that's enough make a pair of skirts, I'll sell the stuff to you cheap.

Cheers,
Rich

07-14-2008, 01:24 AM	#43 (permalink)
Xringer Old Retired R&D Dude Join Date: May 2008 Location: Woburn Mass USA Posts: 569 Little Red - '012 Prius c 2 Two 90 day: 26.38 mpg (US) Transporter - '09 Escape XLS Thanks: 1 Thanked 8 Times in 8 Posts	Far out! But, I'm wondering why you have them cut out in the bottom (around the center area).?. Almost all the skirts I've seen were flat across the bottom.. I think Coroplas might be the better way to go. It's much lighter than acrylic/Plexiglas(?). If that stuff were to fly off the car, it might not be something anyone would want hit or be hit by.. Whereas a piece of Coroplas weighs about the same as cardboard.. I have two pieces of blue Coroplas one is 2x4 feet and the other is about 24x32 inches. I used some for an airplane tail.. http://i46.photobucket.com/albums/f1...PA32D/d0ce.jpg It looks a little lighter blue in this pic.. Anyways, if that's enough make a pair of skirts, I'll sell the stuff to you cheap. Cheers, Rich __________________ Cheers, Rich