Fiiiiiiiiiiinaly the Paseo is back on the road. The exhaust work is now done an I'm pretty happy with it, and extatic that the car is back on the road.
This is basically what I had to make to extend the exhaust over the rear axle. The last step (what I did today) was cut right in the middle of the bend and I inserted that straight piece. The radius was a bit too sharp and the axle would hit it over pretty much any bumps.
In addition to making that piece, I also had to cut the exhaust behind the cat and reweld it at an angle to straighten it out. Just add the muffler and a bit of straight pipe out the back and we're (again finally) all done.
