Go Back   EcoModder Forum > Ryland's Profile > Albums
Reload this Page electric motorcycle project
Register Now
 Register Now

Now available from EcoModder: ScanGauge II fuel economy gauge. Click for details.  

electric motorcycle project
The build of an electric motorcycle that can be reproduced.
This photo is not of my motorcycle, but it is of one of the shafts I made showing how well it fits in to a Honda Goldwing's swing arm's drive shaft,...
This photo looks a little odd because I didn't have the motor plate drilled and tapped to be bolted on to the battery box yet, so it's all just...
Motorcycle battery box with the motor plate bolted on and a single T105 6v golf cart battery sitting in the box, this battery is one of 6 that will...
The first try at the plate that the electric motor mounts to, we made some mistakes at first so it has alot of extra holes, but it is a working part.
Adapter shafts to make more electric motorcycles!
Adapter shaft that connects the electric golf cart motor to the drive shaft of the motorcycle.
Close up of the motor bolted on to the frame, no connecting shaft yet.
Cycle with motor bolted on as a mock up.
Spare bearing carrier, a design change left this as a spare part that I'll have to come up with another project to so I can use it.
Left side of the motorcycle frame, engine removed, air box gone, ready to start fitting the new parts to it.
Right side of the frame, in this one you can see the drive shaft inside of the swing arm, as you can see there is alot of space for batteries in that...
Starting point, seat and gas tank removed, next up, the gas engine.
The motor, not that big! but heavy.
Pretty much your standard series wound golf cart motor.


Contact Us - EcoModder.com - Archive - Top

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2012, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO 3.5.2
All content copyright EcoModder.com