Go Back   EcoModder Forum > EcoModding > Aerodynamics
Register Now
 Register Now
 

Reply  Post New Thread
 
Submit Tools LinkBack Thread Tools
Old 07-07-2012, 03:17 PM   #1 (permalink)
OCD Master EcoModder
 
brucepick's Avatar
 
Join Date: Dec 2007
Location: Eastern CT, USA
Posts: 1,933

Outasight - '00 Honda Insight
Team Honda
Gen-1 Insights
90 day: 54.18 mpg (US)
Thanks: 429
Thanked 391 Times in 261 Posts
Civic Lower Grill Smooth Cover Panel

I added this to the Civic in mid June 2012:


Bear in mind that the car already has a full length belly pan, flat wheel covers and a Kamm roof extension. However this project was the quickest and easiest of all of those.

It's made of 2.7 mm. lauan plywood, primed with oil base house paint. Cut with a box cutter. Fastened with #8 stainless sheet metal screws & fender washers. I like stainless for this kind of project; it costs just a few dollars more and won't look ugly after the first couple rainy days.

The panel outline is a curved shape, similar to a front windshield, angled down towards the front instead of up. You have to mark points or guide lines on the panel, then trim away carefully and recheck constantly to get the curves you need. I did enlarge the opening somewhat after taking this photo,and also adjusted the upper line so it appears more level.

This generation Civic has the radiator on passenger side, and the a/c condenser and cat converter/exhaust manifold on the driver's side. Thus the opening where you see it. A ScanGauge lets me keep an eye on temps.

The upper grill cover is good ol' duct tape, the 3M non-marring type. No residue.

__________________
Coast long and prosper.
Driving '00 Honda Insight, acquired Feb 2016.


  Reply With Quote
The Following User Says Thank You to brucepick For This Useful Post:
aerohead (07-07-2012)
Alt Today
Popular topics

Other popular topics in this forum...

   
Old 07-07-2012, 06:14 PM   #2 (permalink)
Wiki Mod
 
Weather Spotter's Avatar
 
Join Date: Nov 2009
Location: Midland MI, USA
Posts: 2,042

Max - '14 Ford C-Max SEL
Thanks: 228
Thanked 304 Times in 210 Posts
looks good

now try a boat tail and join the club
__________________
  Reply With Quote
Old 07-07-2012, 08:46 PM   #3 (permalink)
GRU
Master EcoModder
 
GRU's Avatar
 
Join Date: Oct 2011
Location: Windsor ON Canada
Posts: 373

silver bullet - '00 Honda Civic
90 day: 34.41 mpg (US)
Thanks: 21
Thanked 37 Times in 32 Posts
Can you post pics of the kamm?
__________________

  Reply With Quote
Old 07-08-2012, 07:41 AM   #4 (permalink)
OCD Master EcoModder
 
brucepick's Avatar
 
Join Date: Dec 2007
Location: Eastern CT, USA
Posts: 1,933

Outasight - '00 Honda Insight
Team Honda
Gen-1 Insights
90 day: 54.18 mpg (US)
Thanks: 429
Thanked 391 Times in 261 Posts
Quote:
Originally Posted by GRU View Post
Can you post pics of the kamm?
Here's one:


And here's where you can see a few:
Civic rear Kamm extension pics

Really, it deserves its own thread. But it also deserves to be improved so I've put off writing that thread. I do believe it helps, but has a couple issues that I don't have fixes for yet. So it's kind of stuck in this "temporary but working" status.
__________________
Coast long and prosper.
Driving '00 Honda Insight, acquired Feb 2016.


  Reply With Quote
The Following User Says Thank You to brucepick For This Useful Post:
aerohead (07-09-2012)
Old 07-09-2012, 10:40 PM   #5 (permalink)
GRU
Master EcoModder
 
GRU's Avatar
 
Join Date: Oct 2011
Location: Windsor ON Canada
Posts: 373

silver bullet - '00 Honda Civic
90 day: 34.41 mpg (US)
Thanks: 21
Thanked 37 Times in 32 Posts
cool. i was thinking about doing the exact same kamm. half way down the rear window that way i can still see what's behind me.
__________________

  Reply With Quote
Old 10-25-2012, 05:11 PM   #6 (permalink)
OCD Master EcoModder
 
brucepick's Avatar
 
Join Date: Dec 2007
Location: Eastern CT, USA
Posts: 1,933

Outasight - '00 Honda Insight
Team Honda
Gen-1 Insights
90 day: 54.18 mpg (US)
Thanks: 429
Thanked 391 Times in 261 Posts
Quote:
Originally Posted by GRU View Post
cool. i was thinking about doing the exact same kamm. half way down the rear window that way i can still see what's behind me.
Make it long enough so the raised trunk lid just clears it. My eyeball test shows - if your panel has same slope as mine - you will still see out thru all the defroster wire area. I figure the space above the wires, you don't need to see thru there. Mine is still 10" shorter than that because I didn't know I could go that far.
__________________
Coast long and prosper.
Driving '00 Honda Insight, acquired Feb 2016.


  Reply With Quote
Old 10-25-2012, 10:52 PM   #7 (permalink)
OCD Master EcoModder
 
brucepick's Avatar
 
Join Date: Dec 2007
Location: Eastern CT, USA
Posts: 1,933

Outasight - '00 Honda Insight
Team Honda
Gen-1 Insights
90 day: 54.18 mpg (US)
Thanks: 429
Thanked 391 Times in 261 Posts
Now, back to the Grill Block.

Recently added an "adjustable" cover panel to the lower cover opening. Velcro strips on the bumper panel, and velcro patches about 1" x 1/2" on the back side of the removable cover for the lower opening. So I can position it where I like depending on outside temperature.

Also see the plexiglass cover for the upper grill. I will need a different version of this upper cover for warmer weather that will let the radiator side of the grill breathe.



Now for some detail. Here's a closer shot of the lower adjustable cover panel:


And a closer shot of the plexiglass upper grill cover.

Needs one more screw in lower corner. The screws and fender washers are stainless. Regular galvanized ones get grubby looking pretty quickly where I live.
__________________
Coast long and prosper.
Driving '00 Honda Insight, acquired Feb 2016.


  Reply With Quote
The Following User Says Thank You to brucepick For This Useful Post:
user removed (12-30-2012)
Old 10-25-2012, 11:02 PM   #8 (permalink)
Moderator
 
Vman455's Avatar
 
Join Date: Feb 2012
Location: Urbana, IL
Posts: 1,935

Pope Pious the Prius - '13 Toyota Prius Two
Team Toyota
SUV
90 day: 51.62 mpg (US)

Tycho the Truck - '91 Toyota Pickup DLX 4WD
90 day: 22.22 mpg (US)
Thanks: 198
Thanked 1,797 Times in 937 Posts


That looks great!
__________________
UIUC Aerospace Engineering
www.amateuraerodynamics.com
  Reply With Quote
The Following User Says Thank You to Vman455 For This Useful Post:
brucepick (10-25-2012)
Old 12-30-2012, 07:09 PM   #9 (permalink)
Red Light Avoider
 
pletby's Avatar
 
Join Date: Jul 2010
Location: Winnipeg, Manitoba, Canada
Posts: 296

My Civic - '00 Honda Civic DX
Team Honda
90 day: 46 mpg (US)
Thanks: 114
Thanked 47 Times in 34 Posts
I really like the look of that upper grille block! Nice work. Will take note on those stainless steel screws and washers too. I'm thinking mine will look pretty ratty come summer.
__________________


  Reply With Quote
Old 12-30-2012, 08:20 PM   #10 (permalink)
Adventurist!
 
Join Date: Sep 2012
Location: Nashville, TN
Posts: 144

CLaero - '97 Acura CL Premium
90 day: 34.59 mpg (US)

CR-v - '03 Honda CR-V EX
Team Honda
90 day: 26.52 mpg (US)
Thanks: 9
Thanked 21 Times in 21 Posts
I love the plexi upper, and have been toying with the idea of using velcro on the lower of my Acura, using 3 pieces so I can remove 1 or two if need be. Did you use the "Industrial Grade" stuff or just the standard stuff (adhesive backed, I assume)?

__________________
'97 Acura CL 2.2L 5spd
'03 Honda CR-V 2.4L EX 4wd Auto
  Reply With Quote
Reply  Post New Thread


Thread Tools




Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Content Relevant URLs by vBSEO 3.5.2
All content copyright EcoModder.com