Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post - Little help with INJ signal, on a motorcycle

DanielMaia · 07-09-2011, 06:26 PM

Hi there,

Im considering the MPGuino, but first i need to know if i can get the right INJ singal

The bike is a Honda CBF125, with PGM-FI fuel injected by Keyhin.

The thing is: im almost sure that is a wire pink/green the INJ signal, but i dont know how i should measure it. Voltimeter? + to wire, and - to ground (engine earth)?

What values should i expect when accelerating?

thank you a lot

07-09-2011, 06:26 PM	#1 (permalink)
DanielMaia EcoModding Lurker Join Date: Apr 2011 Location: Portugal Posts: 8 Thanks: 0 Thanked 0 Times in 0 Posts	Little help with INJ signal, on a motorcycle Hi there, Im considering the MPGuino, but first i need to know if i can get the right INJ singal The bike is a Honda CBF125, with PGM-FI fuel injected by Keyhin. The thing is: im almost sure that is a wire pink/green the INJ signal, but i dont know how i should measure it. Voltimeter? + to wire, and - to ground (engine earth)? What values should i expect when accelerating? thank you a lot