Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post - Paul and Sabrina's Cheap 3 Phase Inverter (AC Controller) with Field Oriented Control

arber333 · 10-31-2016, 06:59 AM

Hi

Does anyone have bare resolver to encoder PCB that they can take a photo of?
I have completed mine, but in the end last three contacts have developed short. I tried to clean this but in the end only a glob of molten solder and vacuum tool cleared it. Well to my dismay i saw that vacuum sucked not only excess solder but also a tab under AD2S pin 47 REFOUT. I am not sure how to proceed, since i dont have either schematic or PCB to see where those connections go. I would either need .sch file or a good picture of tracks of unpopulated PCB.

https://leafdriveblog.files.wordpres...-10-31-762.jpg

TNX

10-31-2016, 06:59 AM	#2859 (permalink)
arber333 EcoModding Lurker Join Date: Jul 2011 Location: Slovenia Posts: 70 Thanks: 0 Thanked 20 Times in 13 Posts	resolver to encoder PCB Hi Does anyone have bare resolver to encoder PCB that they can take a photo of? I have completed mine, but in the end last three contacts have developed short. I tried to clean this but in the end only a glob of molten solder and vacuum tool cleared it. Well to my dismay i saw that vacuum sucked not only excess solder but also a tab under AD2S pin 47 REFOUT. I am not sure how to proceed, since i dont have either schematic or PCB to see where those connections go. I would either need .sch file or a good picture of tracks of unpopulated PCB. https://leafdriveblog.files.wordpres...-10-31-762.jpg TNX