Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post - Paul and Sabrina's Cheap 3 Phase Inverter (AC Controller) with Field Oriented Control

ale0502 · 10-31-2016, 01:29 PM

Hi arber333,
I don´t have that board, but on AD2S1210 datasheet say that pin 47 is "Voltage Reference Output" and on the analog devices evaluation board "EVAL-AD2S1210SDZ" is not connected, only goes to a testpoint.
Paul surely going to help you.

Now I have a question for Paul and another forum members, I have my hardware controller finish and my dspic communication works good, there any way to disable failures? Because, I don´t have the desat fail conected and another thinks, and my controller protect the hardware triggering the alarm and dosent works.

thanks

10-31-2016, 01:29 PM	#2860 (permalink)
ale0502 Ale Madeo Join Date: Jan 2016 Location: Bariloche Patagonia Argentina Posts: 32 Thanks: 22 Thanked 7 Times in 5 Posts	Hi arber333, I don´t have that board, but on AD2S1210 datasheet say that pin 47 is "Voltage Reference Output" and on the analog devices evaluation board "EVAL-AD2S1210SDZ" is not connected, only goes to a testpoint. Paul surely going to help you. Now I have a question for Paul and another forum members, I have my hardware controller finish and my dspic communication works good, there any way to disable failures? Because, I don´t have the desat fail conected and another thinks, and my controller protect the hardware triggering the alarm and dosent works. thanks __________________ Los que dicen que es imposible, no deberían molestar a los que lo están intentando...