Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post - Paul and Sabrina's Cheap 3 Phase Inverter (AC Controller) with Field Oriented Control

esali1987 · 12-16-2018, 10:40 PM

Ok so this is what I have pinned out from the USB to RS-232 cable to the 2X3 board header:
Pin 2 >> header pin 1 (MISO)
Pin 3 >> header pin 4 (MOSI)
Pin 5 >> header pin 6 (CONTROL_GND)
This gives me a FF or Null in the command prompt. Is this wrong?

12-16-2018, 10:40 PM	#3320 (permalink)
esali1987 EcoModding Lurker Join Date: May 2018 Location: Menifee, CA Posts: 17 Thanks: 16 Thanked 0 Times in 0 Posts	Ok so this is what I have pinned out from the USB to RS-232 cable to the 2X3 board header: Pin 2 >> header pin 1 (MISO) Pin 3 >> header pin 4 (MOSI) Pin 5 >> header pin 6 (CONTROL_GND) This gives me a FF or Null in the command prompt. Is this wrong?