View Single Post
Old 01-20-2019, 07:46 PM   #3348 (permalink)
thingstodo
Master EcoModder
 
Join Date: Sep 2010
Location: Saskatoon, canada
Posts: 1,460

ChargE (not yet running) - '92 Mazda MX6 LX
90 day: 33.89 mpg (US)

Ford Prefect - '18 Ford F150 XLT XTR
Thanks: 741
Thanked 538 Times in 433 Posts
Quote:
Originally Posted by 02BMW02 View Post
Many Thanks thingstodo,

I so hope this controller works for me, Ive had a run of back luck with controllers, have gone through two can bus controllers and Pauls drop in leaf board controller nothing worked, Paul has told me that there must a fault on the leaf main circuit board.

Ironically the board that I'm building was the first board I bought from Paul.

What version board to you have ? I have Ver 0.4

What setup are you running any pictures ?

I know you build your system a while ago.

I don't understand how to connect J43 & J44 "high voltage DC monitoring", do I need to wire resistors in series here ? eventually I will be using a Leaf pack 360V
I found a version on the AC board - 1.0 ... but it is likely within the first 5 he built.

I have a couple of controller boards that I got from Paul to do the brain transplant thing on industrial AC drive. They are version 0.3
__________________
In THEORY there is no difference between Theory and Practice
In PRACTICE there IS!
  Reply With Quote