View Single Post
Old 02-05-2019, 02:27 PM   #3366 (permalink)
Master EcoModder
jackbauer's Avatar
Join Date: Sep 2009
Location: Ireland
Posts: 734
Thanks: 26
Thanked 297 Times in 169 Posts
I am using mplabx. quite easy to setup and use :

Regards the hall effect throttle, I am using one from a bmw e46 that outputs between 0.65 and 4.3v so I just feed this into the throttle input and give it +5v and ground then workout the calibration as normal. No need to mess about with resistors at all.
Now, Cole, when you shift the gear and that little needle on the ammeter goes into the red and reads 2000 Amps, that's bad.
  Reply With Quote