Go Back   EcoModder Forum > EcoModding > DIY / How-to
Register Now
 Register Now
 

Reply  Post New Thread
 
Submit Tools LinkBack Thread Tools
Old 09-02-2008, 06:51 PM   #1 (permalink)
Carbon based lifeform
 
dentprone's Avatar
 
Join Date: Jul 2008
Location: North FL
Posts: 80

Green Rocket - '01 Subaru Forester

Clifford - '76 Dodge M880

RuhRoh - '94 Geo Metro
Thanks: 0
Thanked 0 Times in 0 Posts
2 Cylinder Metro?

Hi all,

I just picked up my first Metro, soon to be followed by 2 more next week. This one is a '94 2 door manual that has spent it's entire life in Central FL, so it is absolutely rust-free. I got it fairly cheap because #3 rod bearing is gone, and has scored the crank badly. I will be swapping a good engine into it from an ugly, but clean '91, and handing it over to my wife for her commute. I plan on using the '91 as a test vehicle. OK.....I'll get to the point now. I am kicking around the idea of removing the piston and rod from the damaged motor, and putting it back together, using only 2 cylinders. I would then install this motor in the test car. I think I will have to weld up the oiling port in the crank on #3 journal, and there will be other issues, I'm sure. Any thoughts, comments, ridicule, or bets appreciated.

__________________
-Chuck

Watching paint dry?
Check out my blog.......
http://www.mobiblog2500.blogspot.com
  Reply With Quote
Alt Today
Popular topics

Other popular topics in this forum...

   
Old 09-02-2008, 06:56 PM   #2 (permalink)
(:
 
Frank Lee's Avatar
 
Join Date: Jan 2008
Location: up north
Posts: 12,762

Blue - '93 Ford Tempo
Last 3: 27.29 mpg (US)

F150 - '94 Ford F150 XLT 4x4
90 day: 18.5 mpg (US)

Sport Coupe - '92 Ford Tempo GL
Last 3: 69.62 mpg (US)

ShWing! - '82 honda gold wing Interstate
90 day: 33.65 mpg (US)

Moon Unit - '98 Mercury Sable LX Wagon
90 day: 21.24 mpg (US)
Thanks: 1,585
Thanked 3,555 Times in 2,218 Posts
Starting with a 3 cyl? I predict it'll shake like crazy and you won't enjoy running it. However, if it was a 4 and you pulled 2 out, I think it would work.
__________________


  Reply With Quote
Old 09-02-2008, 08:41 PM   #3 (permalink)
Addicted
 
bbjsw10's Avatar
 
Join Date: Jul 2008
Location: Findlay,OH
Posts: 555

bbjsw10 - '91 Geo Metro Xfi
90 day: 51.06 mpg (US)
Thanks: 0
Thanked 11 Times in 7 Posts
I wouldn't do it. By removing the rod/piston you are throwing the whole assembly out of balance you could end up destroying more in the end. And the last time I looked Metro parts keep going up and up in price. I would not take the chance, they are great little cars.
__________________
  Reply With Quote
Old 09-02-2008, 08:54 PM   #4 (permalink)
Carbon based lifeform
 
dentprone's Avatar
 
Join Date: Jul 2008
Location: North FL
Posts: 80

Green Rocket - '01 Subaru Forester

Clifford - '76 Dodge M880

RuhRoh - '94 Geo Metro
Thanks: 0
Thanked 0 Times in 0 Posts
True......I hadn't thought of the balance issue. It looks like the crank will be fine after I have it turned, just something that had crossed my mind. I truly appreciate the replies.
__________________
-Chuck

Watching paint dry?
Check out my blog.......
http://www.mobiblog2500.blogspot.com
  Reply With Quote
Old 09-02-2008, 09:35 PM   #5 (permalink)
VIVA LA MPG RESISTANCE
 
Will's Avatar
 
Join Date: Mar 2008
Location: Brownsville, Tn
Posts: 328

Meat-roll - '97 Geo Metro
Team Metro
90 day: 55.4 mpg (US)

Wife's Brruik - '03 Buick Century
90 day: 30.84 mpg (US)

Blue Balt - '08 Chevrolet Cobalt XFE
Team Chevy
90 day: 38.19 mpg (US)
Thanks: 0
Thanked 3 Times in 3 Posts
I would have the crank fixed. A Metro will not run well on two cyliners. When I bought mine number two was out. I was running on one and three. The motor ran real bad. It shook violently and had no power at all. It was all I could do to get it home, and I only got 34 MPG doing it. The 34MPG was due to the motor still sending fuel to the down cyliner, but the motor was horribly off balanced.

If you want to mess around with two cylinder motors I would look at motorcycles
  Reply With Quote
Old 09-02-2008, 10:39 PM   #6 (permalink)
EcoModding Apprentice
 
Bicycle Bob's Avatar
 
Join Date: May 2008
Location: N. Saskatchewan, CA
Posts: 1,803

Appliance White - '93 Geo Metro 4-Dr. Auto
Last 3: 42.35 mpg (US)

Stealth RV - '91 Chevy Sprint Base
Thanks: 91
Thanked 459 Times in 327 Posts
I'll second the notion of starting with a 4-cyl crank and cam to make a two-banger. I'd only do it if I was going to do some serious streamlining to reduce the power needed on the highway. A 3-cyl with an extra-mild cam and tall gears would probably be my preference for reduced power, though.
I used to prefer even numbers of cylinders except on radials, but now I realize that the inline 3 only stops one piston at a time, while fours stop all four at once.
__________________
There is no excuse for a land vehicle to weigh more than its average payload.
  Reply With Quote
Old 09-03-2008, 10:41 PM   #7 (permalink)
Hi-Tech Redneck
 
Johnny Mullet's Avatar
 
Join Date: May 2008
Location: Ashtabula, Ohio
Posts: 1,436
Thanks: 6
Thanked 49 Times in 42 Posts
Send a message via AIM to Johnny Mullet Send a message via MSN to Johnny Mullet
My Metro was purchased with a dead cylinder also. It ran really bad, but still got 35MPG
__________________

GeoMetroforum.com - got mpg?
  Reply With Quote
Old 09-03-2008, 10:47 PM   #8 (permalink)
Carbon based lifeform
 
dentprone's Avatar
 
Join Date: Jul 2008
Location: North FL
Posts: 80

Green Rocket - '01 Subaru Forester

Clifford - '76 Dodge M880

RuhRoh - '94 Geo Metro
Thanks: 0
Thanked 0 Times in 0 Posts
I have nixed the two-cylinder idea, pulled the motor today and found most of #3 piston skirt in the pan. Cylinder looks good, though.....the only concern now is that I have minor scoring in the cam bores. I'll have to see just how bad it really is. Thank you all for your input...probably stopped me from doing something stupid.
__________________
-Chuck

Watching paint dry?
Check out my blog.......
http://www.mobiblog2500.blogspot.com
  Reply With Quote
Old 09-03-2008, 11:13 PM   #9 (permalink)
hypermiling newbie
 
Join Date: Apr 2008
Location: currently being held hostage in the burgh.
Posts: 20
Thanks: 0
Thanked 0 Times in 0 Posts
i fear the worst in cutting a cylinder from the mix... engineers said there should be three... they built -tested-retested with three... you were built with two feet(i hope) what would happen if we discarded one? either way i wish you the best of luck.
  Reply With Quote
Old 09-04-2008, 12:21 AM   #10 (permalink)
home of the odd vehicles
 
rmay635703's Avatar
 
Join Date: Jun 2008
Location: Somewhere in WI
Posts: 3,874

Silver - '10 Chevy Cobalt XFE
Thanks: 495
Thanked 863 Times in 650 Posts
If the motor ends up being toast or too expensive to fix and you have a reasonable machine shop nearby find a running but junked Japanese mini truck like you see on the side of the road as OFF ROAD/FARM USE with a 660cc 2 cylinder get a flexplate adapter, mount it up and off you go, albeit probably not very quickly.

Good Luck

  Reply With Quote
Reply  Post New Thread


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Why I'm Choosing a Civic Over a Metro Wayneburg General Efficiency Discussion 43 03-02-2011 05:11 PM
Mullet's Metro Project Johnny Mullet EcoModding Central 302 02-06-2011 07:04 PM
Planning Project Eco-Z seanof30306 EcoModding Central 20 08-24-2009 10:00 PM
Metro Hoarding 101 - also: Metro pickup trucks! Cowspots Introductions 28 04-14-2008 07:26 PM
Radical Metro Aero Mods? Coyote X Aerodynamics 8 01-01-2008 04:05 PM



Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Content Relevant URLs by vBSEO 3.5.2
All content copyright EcoModder.com