Go Back   EcoModder Forum > EcoModding > Aerodynamics
Register Now
 Register Now
 

Reply  Post New Thread
 
Submit Tools LinkBack Thread Tools
Old 03-16-2015, 10:10 AM   #1 (permalink)
Noobie
 
Join Date: Mar 2015
Location: Colorado
Posts: 45
Thanks: 0
Thanked 7 Times in 7 Posts
2005 Acura TSX 6 Manual Aero Mods

Noobie here first time post....

I have been lurking on here for about 5 years, just never a real username and post.

I recently just achieved 30.8 MPG Average last week. This now has me hopefully yo achieve 35 with some lite mods.

My list is a follows...

1) DELETE, Outside Side Rear View Mirrors
2) ADD, Convex Inside Side Rear View Mirrors
3) ADD, Convex Clip-On Rear View Mirror
4) ADD, 2006-2009 Civic Hybrid Wheels or Enkei RPF1 15LBS EACH.
5) LOWER 1"-2" to decrease wheel gaps.
6) Possibly block off front bumper and grill.

Side Question: I am aware that lightweight components are good for auto racing and acceleration. However is it better to have stream-lined wheel or lightweight wheels for better economy??

I am considering either lightweight wheels or stream-lined wheels, but i am wondering what is better economy purposes?? Please note modification #4...

  Reply With Quote
Alt Today
Popular topics

Other popular topics in this forum...

   
Old 03-16-2015, 04:53 PM   #2 (permalink)
Noobie
 
Join Date: Mar 2015
Location: Colorado
Posts: 45
Thanks: 0
Thanked 7 Times in 7 Posts
bump
  Reply With Quote
Old 03-16-2015, 05:18 PM   #3 (permalink)
Got MPG?
 
Join Date: Sep 2010
Location: Southern Alberta, Canada
Posts: 330

The Car - '09 Toyota Corolla CE Enhanced
Thanks: 13
Thanked 43 Times in 38 Posts
What mods have you already done?

The whole idea behind EM is to install or apply items/techniques that cost little money so that your return on investment is high. Racing mods/parts are usually quite pricey as they appeal to a crowd that is racing and are willing to fork over $$ to eek out that last bit of performance.

Only you can decide from your driving route and conditions whether you will benefit from lighter wheels (in city) or covered ones (hiway travel).
__________________
2013 Honda Civic Si - 2.4L
OEM front to back belly pan from the factory.
  Reply With Quote
Old 03-16-2015, 10:48 PM   #4 (permalink)
Master EcoModder
 
Join Date: Jan 2012
Location: United States
Posts: 1,756

spyder2 - '00 Toyota MR2 Spyder
Thanks: 104
Thanked 407 Times in 312 Posts
You can't buy aftermarket streamlined wheels because wheels are usually not designed with aerodynamics in mind. You put covers on wheels to reduce their drag, and you buy lightweight wheels to make them lighter.
  Reply With Quote
Old 03-17-2015, 12:27 AM   #5 (permalink)
EcoModding Apprentice
 
Join Date: Feb 2010
Location: Howells Ne
Posts: 126

Supra - '88 Toyota Supra

superhawk - '98 Honda superhawk
Last 3: 27.62 mpg (US)

Lesabre - '96 buick lesabre
3800
90 day: 25.85 mpg (US)

Saturn - '97 Saturn Sc2
Team Saturn
Sports Cars
90 day: 39.12 mpg (US)

Truk - '99 Ford F150
Team Ford
Pickups
90 day: 24.43 mpg (US)

Golf - '03 Vw Golf
90 day: 38.57 mpg (US)
Thanks: 17
Thanked 7 Times in 6 Posts
The best mods to start with are an ultragauge or scan gauge that can often be the most beneficial mod you can do. Then upping tire to the max sidewall pressure for lower rolling resistance and a grill block for better aerodynamics and quicker warm up times
  Reply With Quote
Old 03-17-2015, 04:26 AM   #6 (permalink)
Hydrogen > EV
 
Join Date: Apr 2012
Location: NW Ohio, United States
Posts: 2,022

Silver Flea - '05 Honda Insight
90 day: 58.96 mpg (US)
Thanks: 992
Thanked 396 Times in 283 Posts
I disagree that the point of EM is to cost efficiently Eco Mod our cars- some of us (me lol) have gotten way in over our head on what we planned to spend and did spend...

BUT, if you want to get the most out of the vehicle, get the lightest wheel, then make it smooth. It is easier to take a light wheel and add a skirt or pizza pan, than take an aero wheel and cut weight.

(I don't just waste money on EMing, and cost is really considered, but I do this to maximize FE- I'm not rebuilding my car from carbon fiber, but I am also not sacrificing too much in looks for performance (that only applies to one car).)
__________________





Best Tanks:
Mustang - 54.83 mpg (US) at the Green Grand Prix
Insight - 82.91966 mpg (US) over 818.5 miles.
  Reply With Quote
Old 03-17-2015, 06:38 AM   #7 (permalink)
Master EcoModder
 
aardvarcus's Avatar
 
Join Date: Apr 2012
Location: Evensville, TN
Posts: 676

Deep Blue - '94 GMC Suburban K2500 SLE
90 day: 23.75 mpg (US)

Griffin (T4R) - '99 Toyota 4Runner SR5
90 day: 25.43 mpg (US)
Thanks: 237
Thanked 580 Times in 322 Posts
How much do the Civic Hybrid wheels weigh? On a previous vehicle I used Prius 15" wheels, they were both very lightweight (14lbs?) and had fairly smooth covers which I considered the best of both worlds. Plus they looked very stock-ish.

One thing to ensure is that the wheels not only are similar in lug pattern but also offset (how far in or out the hub face is from the center of the wheel) and seat type (is the wheel centered on the hub or on the lug nuts). This will prevent you from having any bearing or balancing issues respectively.
  Reply With Quote
The Following User Says Thank You to aardvarcus For This Useful Post:
Cd (03-17-2015)
Old 03-17-2015, 06:17 PM   #8 (permalink)
Master EcoModder
 
aerohead's Avatar
 
Join Date: Jan 2008
Location: Sanger,Texas,U.S.A.
Posts: 15,861
Thanks: 23,922
Thanked 7,207 Times in 4,640 Posts
HWY mpg

If you're looking at 35 mpg HWY,the mass reduction from the wheels won't show at the gas pump.
To get to 35,from 30.8 would require about a 27% drag reduction,or,from Cd 0.27,to Cd 0.197.
HONDA has already worked on the grille a bit.Allowing a 6% reduction would give delta 0.0162.
Pulling the passenger side mirror ,maybe delta 0.0135.
Together,you'd be looking at Cd 0.2403.
Dropping the car 2" according to some,will cut some frontal area,but not really alter the Cd significantly.If we allowed delta 0.01,we'd come in at Cd 0.23,still 0.04 short of 0.19.
I feel like you'd have to go 'deeper' on the aero to get to 35 mpg.
__________________
Photobucket album: http://s1271.photobucket.com/albums/jj622/aerohead2/
  Reply With Quote
The Following User Says Thank You to aerohead For This Useful Post:
Cd (03-17-2015)
Old 03-17-2015, 07:02 PM   #9 (permalink)
Hydrogen > EV
 
Join Date: Apr 2012
Location: NW Ohio, United States
Posts: 2,022

Silver Flea - '05 Honda Insight
90 day: 58.96 mpg (US)
Thanks: 992
Thanked 396 Times in 283 Posts
Hope he comes back...

How dirty is the underside? A belly pan should help, and if you're willing, boat tailing will make a HUGE impact. Even a box cavity should help, if done properly.
__________________





Best Tanks:
Mustang - 54.83 mpg (US) at the Green Grand Prix
Insight - 82.91966 mpg (US) over 818.5 miles.
  Reply With Quote
The Following User Says Thank You to UltArc For This Useful Post:
Cd (03-17-2015)
Old 03-18-2015, 10:18 AM   #10 (permalink)
Noobie
 
Join Date: Mar 2015
Location: Colorado
Posts: 45
Thanks: 0
Thanked 7 Times in 7 Posts
Quote:
Originally Posted by LeanBurn View Post
What mods have you already done?
I took off my roof rack

  Reply With Quote
Reply  Post New Thread


Thread Tools




Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Content Relevant URLs by vBSEO 3.5.2
All content copyright EcoModder.com