EcoModder.com

EcoModder.com (https://ecomodder.com/forum/)
-   Aerodynamics (https://ecomodder.com/forum/aerodynamics.html)
-   -   300zx Boat Tail (https://ecomodder.com/forum/showthread.php/300zx-boat-tail-5056.html)

forgottenmindset 09-11-2008 02:22 PM

300zx Boat Tail
 
Hey all I need some help trying to figure the best design for a boat tail for my 87 Nissan 300zx

Photochoppers welcome!

http://www.srtgurl.com/NIVOz/IMG_4773.jpg
http://pdftown.com/image/2487z31.jpg

This one's for the photochoppers
http://www.swaqvalley.com/Blueprints...00ZX_Turbo.jpg

I need to know the best slope angle for the rear, I can even raise the hatch a little if that helps.

SVOboy 09-11-2008 02:37 PM

Is the airflow attached across the rear hatch glass?

Tuft testing time!

lunarhighway 09-11-2008 03:48 PM

according to wikipedia your Cd is should be about 0.30 so that's not a bad start, especially with the small frontal area.
if you draw a line from the top of the roof to the edge of the spoiler you come pretty close to 11 degrees so that's pretty good...

if you fill that in with a solid form you get something like this; wich i think isn't much different from what's already there :

http://i77.photobucket.com/albums/j5...ghway/dats.png

personally id focus on the underside of the car, partial of full undertray, have a good look at the cooling system and see if the wheels could use dams or deflectors... lots of these things are found of modern cars so they really work, since your car is a little older it doesn't have these things but it's basic shape is has to be really decent already, the underside might look a little messy however, so personally i'd focus on thosr areas before venturing into altering the body of the car.

Daox 09-11-2008 03:50 PM

I agree. That back window is a bit on the steep side for keeping airflow attached. Tuft testing is gonna be needed.

aerohead 09-11-2008 06:14 PM

some help
 
Quote:

Originally Posted by forgottenmindset (Post 60595)
Hey all I need some help trying to figure the best design for a boat tail for my 87 Nissan 300zx

Photochoppers welcome!

http://www.srtgurl.com/NIVOz/IMG_4773.jpg
http://pdftown.com/image/2487z31.jpg

This one's for the photochoppers
http://www.swaqvalley.com/Blueprints...00ZX_Turbo.jpg

I need to know the best slope angle for the rear, I can even raise the hatch a little if that helps.

forgottenmindset,if you can locate MetroMPG's thread for his permanent Kammback project,you'll find an aerodynamic template to use as a guide for project.There are instructions for its use.Once you fit your Z-car under the "curve",you can decide how large or small to make your boattail.The template will guarantee you attached flow.No guesswork necessary!

suspectnumber961 09-29-2008 02:23 PM

I can tell you one thing about the 300ZX...don't block off the scoop area under the bumper...it will overheat even in winter.

Cd 11-26-2008 05:15 PM

Just reading some old postings. ( Missed this one )
Are you still interested in seeing your car with a boattail ?


All times are GMT -4. The time now is 06:08 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Content Relevant URLs by vBSEO 3.5.2
All content copyright EcoModder.com