Building A Velomobile
 

This is a thoroughly awesome build thread, showing how to make a custom velomobile:

The Recumbent Bicycle and Human Powered Vehicle Information Center

http://www.recumbents.com/wisil/wian...bile/page2.htm

http://www.recumbents.com/wisil/wian...bile/page3.htm

http://www.recumbents.com/wisil/wian...bile/page4.htm

http://www.recumbents.com/wisil/wian...bile/page5.htm

http://www.recumbents.com/wisil/wian...bile/page6.htm

http://www.recumbents.com/wisil/wian...bile/page7.htm

http://www.recumbents.com/wisil/wian...bile/page8.htm

Pages 9 and 10 appear to be MIA.

It's all there, step by step by step. Foam egg crate formers with foam skin and overlaid fiberglass - sounds familiar! Good fiberglass techniques on display here, too.

He used coroplast on page eight! :)

I have a new bicycle.
.
.
http://sphotos-a.xx.fbcdn.net/hphoto...45140361_n.jpg
.
.
And soon it will look something like this with a blown oval dome nose, larger hard tail shaped trunk, and stretch fabric skin.
.
.
http://sphotos-a.xx.fbcdn.net/hphoto...55749367_n.jpg
.
.
Then it will get a Crystalyte HS3540 hub motor and 27 A123 Amp20 cells for 40 miles at 40 mph at 40Wh per mile (850 mpge).

Combine that with an E bike kit And some bigger batteries (or more) and you could have yourself a serious personal electric vehicular...

Edit* sorry, just looked through the other pages..