EV CAN Battery Monitor
3 Attachment(s)
Here is a little project I'm working on. I cannot find a nice robust battery monitor so decided to have a go at my own. Sensor board is based on an Atmega328 and an ADS1115 16 bit ADC in differential mode. Reads voltage from 0-500v and current from -600 to +600A and temperature via a thermistor. Transmits via CAN and bluetooth.
All files on my github: https://github.com/damienmaguire/EV-CAN-BAttery-Monitor Software is only bare bones with no checking for valid CAN IDs etc but it does work. Struggling a bit with the amp hour calculations. |
Quote:
Maybe in November or so ... |
All times are GMT -4. The time now is 09:01 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Content Relevant URLs by vBSEO 3.5.2
All content copyright EcoModder.com