|
Constant Current Load
Just thought I'd share a little junkbox project. Having been doing battery testing recently I've been looking at electronic loads. Sadly , in the power rating required , they are out of my price range. Looking on the internet I found some designs but they are little mosfet based circuits of a few amps capacity.
So I decided to try and scale one design up using a 150A IGBT and a 100W 0R1 resistor I had lying around. Mounted them to a heatsink and fan and used a bench psu to provide gate voltage. To my surprise it works quite well. Now just have to put together a little op-amp circuit to make it truly constant current. Running at 32A discharging a 4s4p headway 16ah pack today with no problems.
__________________
Now, Cole, when you shift the gear and that little needle on the ammeter goes into the red and reads 2000 Amps, that's bad.
www.evbmw.com
|
Today
Other popular topics in this forum...
