FS: JDM D15B VX vtec-e with spare block and parts, CX engine and CX/VX transmission
 

Done, thanks!

I want the distrib. in the box of treasures.
I'm also looking for a pass. side brake light?

I wish you were closer, I would like to pick through all those treasures.

Justin

Do you happen to have an EGR box? I am looking for the VX one specifically.

Thanks,
Shane

No egr box, I put one on ebay a few weeks ago and it sold for a whopping $10.50. Wound up sending it to the guy and I have yet to see any payment other than shipping costs.

You can supposedly run without that thing if you have to or you can buy the individual parts to make a box from honda for about $250 I think.

is the VX tranny low miles from Japan? if so how much to ship it to 91978 ? Very sad to hear you had to cancel the project after so much time/effort invested =(. If i wasnt in Ca that shell looks very nice !

I'm enjoying the rest for a change so it's a good thing.

Here's a price breakdown if all the parts are sold as pictured and together:
(not including shipping)

Vtec-e engine only - $400
CX D15B8 engine and transmission only- $140
D15Z1 block only - $50
Box of parts only including both aluminum AC and alt mounts, valvecover and good distributor - $ 80

Edit: I misread your post - the trans they sent from japan is a low mileage, but definitely not VX ratios, when I counted the revolutions in 5th gear it came out to be that of an EX trans. The CX/VX trans I have needs an input shaft bearing.

I will take the distributor.
Do you have any brake parts?
I need the bracket that holds the caliper and pads. Whoever last did the brakes striped one of the holes in mine.
Also any center armrests in that pile?
justin

hmmm. i c. looks cheaper to find an old CX/VX trans out here then. Do you have an extra VX wire harness from inside the engine bay?

I have 2 front calipers and 2 rear brake trailing arm assemblies. No arm rest.



The only engine harness I have is from a DX

I don't need the caliper just the bracket that holds it to the knuckle.
How do you want to deal with the dollars for the distributor?

thanks
justin

I'd like to visit after I get back from Hybridfest and see what you have available.

I'll send you a PM with details. I am Paypal verified. Thanks


Hi Basjoos, you're always welcome to swing by.

Any 5-wire o2 sensors by chance?

Sure don't, sorry

I got the distrib. and calipers today, they look great.
Thanks!
Justin

Seats?

Don't have any blue parts, sorry. The seat, was black, sold it 2 days ago sorry

Thanks to a friend i'm in need of a drivers side mirror.
You dont have one do you?

thanks

Recently sold them, sorry.