How to belt drive just about anything from any engine - DIY
This article describes how to belt drive just about any device like a welder, pump, second alternator, or whatever else you need to spin from the front of most any engine.
It covers a bush method of mounting a second drive pulley to the front of the engine and more professional methods also. The article also has a simple methods of finding bolt hole centers (where to drill the holes) from tight locations without measuring. Much of the information comes after building over a 100 PTO mounts mostly in the field. The article was originally written for boats, where we have to do this all the time, but it will work with just about any off the grid or survival situation or remote radio spot where lots of extra DC amps are needed. The link is- Second marine alternator http://www.tongacharter.com/images/r...20(Custom).jpg Hope this helps Scott |
Hey Scott, that's a pretty interesting read. Doesn't look like many of the ecomodders are too interested in this, but you can bet the car stereo boys will love it.
|
|
Hey Scott,
A great article and very helpful too. Thanks for the post. Cheers , Pete. |
All times are GMT -4. The time now is 08:24 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Content Relevant URLs by vBSEO 3.5.2
All content copyright EcoModder.com