Go Back   EcoModder Forum > EcoModding > Aerodynamics
Register Now
 Register Now
 

Reply  Post New Thread
 
Submit Tools LinkBack Thread Tools
Old 02-22-2014, 01:14 PM   #1 (permalink)
Master EcoModder
 
aerohead's Avatar
 
Join Date: Jan 2008
Location: Sanger,Texas,U.S.A.
Posts: 15,861
Thanks: 23,922
Thanked 7,207 Times in 4,640 Posts
The "Kamm-back" (K-form)

With some of the preliminary images behind us now,it's time to get into the tasty stuff.
This thread will cover the 'K-form' which is commonly referred to as the "Kamm-back",which is a misnomer due to the fact that it was invented by Baron Reinhard von Koenig-Fachsenfeld.
Fachsenfeld's patents were of such great importance to the Third Reich that the Reich's transportation ministry arranged a way to marry his patents to Kamm's FKFS in exchange for laboratory access,allowing this work to gestate under Kamm's educational credentials,of which Fachsenfeld had none.
--------------------------------------------------------------------------
The following images depict the physical evolution of the K-form as it morphs from a streamline body of revolution,to a half-body,then given 'practical' anatomical, human factors,and geometrical considerations to produce a viable automobile which can navigate the streets and highways of the real world.All images are adapted from Fachsenfeld's book,Aerodynamik des Kraftfahrzeugs (The Aerodynamics of Road Vehicles),self-published in 1951



------------------------------------------------------------------------
In the top table you can see the large wake of Pseudo-Jaray aft-bodies(examples:VW Beetle,Chrysler Airflow,Kaiser Henry J,Porsche 911,etc.)which have too steep an incline to support attached flow depicted in the 3rd and 6th images from the top.By 'relaxing' the roof curvature,up to the K-form 'template',the flow re-attaches,the wake is reduced,along with overall drag.
In the bottom two images you see Fachsenfeld's 'extensible' boat tail concept,as Hucho describes it,which Hucho thought we might consider for contemporary streamlining.The tail would be inflated only for out of town highway driving.It's added length gives the added 'elongation' which Hucho insists for really low drag,and reaches into the realm of the 'phantom' tail,in which the deflected,recombining streamlines and boundary layer half-disk create an impenetrable 'surface',with the streamlines following over it as if it were a solid structure.(Dr.Alberto Morelli observed this with his CNR 'banana' car at Pininfarina's wind tunnel in 1976).
-------------------------------------------------------------------------
The second table illustrates the 'Mirror-Image' ground reflection concept invented by Paul Jaray in 1922 which implicates a vehicles 'effective fineness ratio',one of the most important criteria in road vehicle aerodynamics.
--------------------------------------------------------------------------
The third table is the plan-view of the K-form as Fachsenfeld tested it at Stuttgart in the mid-1930s.He plays safe,with no more than 21.5-degrees tangent down-slope angle in side elevation,and 18.5-degrees in plan-view.
This plan-view 'template' favors the 2-D ideal symmetrical wing section contour than Mair's boat tail.Many of the lowest drag cars measured utilize this conservative plan-view contour.
-------------------------------------------------------------------------
As depicted,with optimized leading edge radii,smooth undersides,no cooling systems,side body camber,tumblehome,full tail,and practical windshield,and wheels,this form will produce Cd 0.12 .
-----------------------------------------------------------------------
I'll continue to add tables as time permits.
Here is the FKFS 'Jaray/pseudo-Jaray wind tunnel model schematic which was tested with the 5-different lenghs

Here is the K-form (Koenig-Kamm) FKFS wind tunnel model schematic

Typically,the K-form was superior in drag compared to the J-form until near full-boat-tail lengths at which point the models were identical in architecture.
NOTE: the models have:
*zero leading edge radii
*zero longitudinal edge radii
*zero tumblehome
*zero front/rear elevation vertical body camber
*bellys are smooth
*there are no wheel houses
*no cooling or ventilation passages
*no 'features'
-------------------------------------------------------------------------
DRAG of J-Form model:
the Cds for this model,from shortest,to longest length are:
0.33
0.28
0.26
0.22
0.21
--------------------------------------------------------------------------
DRAG of K-Form model
0.25
0.24
0.24
0.22
0.21
--------------------------------------------------------------------------
The pseudo-Jaray contours come at a high price.
--------------------------------------------------------------------------
Also,the boat tailing suffers do to the compromised leading edges etc.,as Walter Lay discovered in 1933.If the source sucks,so goes the sink!
0.205
-------------------------------------------------------------------------
Here is Kamm's lowest drag,and personal car,rated at Cd 0.23,with Diesel engine and overdrive unit



------------------------------------------------------------------------
Here is the only surviving K-car,from Landenburg Castle,measured with compromised belly pan at Volkswagen wind tunnel,@ Cd 0.37.

-------------------------------------------------------------------------
Here is a wind tunnel tuft study of one of the K-form models clearly demonstrating attached longitudinal vortices, where the higher pressure side flow is migrating up into and shearing the lower pressure air on top.These 'true' fastbacks are the most sensitive of all body types to upper edge radii and tumblehome effects.On a dusty,leaf-covered,or wet road,you'd be able to clearly see these tornadoes trailing behind the 'car.'

Here is an FKFS drag comparison for 'Jaray' sections of varying L/Thickness ratios from Fachsenfeld's book.

Here is a FKFS table,also from Fachsenfeld's book,illustrating a 16.6% difference in drag depending upon whether or not tumblehome,and edge radii are present.You can see the schematic representation of attached longitudinal vortices,spawned by the hard edges.
When BamZipPow can soften the back of his T-100/1-wheel boat-tailed trailer,he ought to realize an additional mpg increase.The cherry on top of the whipped cream!

Here is Professor Wunibald I.Kamm's last K-Car,a modified DKW (AUDI),front wheel drive notchback sedan,built for the Battelle Institute.If you look through the rear windshield you can see the original notchback architecture hidden underneath the Kamm extension.Fachsenfeld's patented split-fin stabilizers are used,as with Kamm's personal WW-II era car.This photograph is from AUTOMOBILE QUARTERLY,in an article on Kamm by Karl Ludvigsen.

__________________
Photobucket album: http://s1271.photobucket.com/albums/jj622/aerohead2/

Last edited by aerohead; 04-18-2015 at 03:45 PM.. Reason: add additional info
  Reply With Quote
The Following 16 Users Say Thank You to aerohead For This Useful Post:
BamZipPow (02-23-2014), California98Civic (06-27-2014), COcyclist (02-24-2014), ecoTex (06-27-2014), freebeard (02-23-2014), Joggernot (06-29-2014), KFM (04-20-2015), MetroMPG (02-23-2014), mikeyjd (04-01-2014), NeilBlanchard (03-31-2014), redneck (02-22-2014), sendler (06-28-2014), spacemanspif (02-22-2014), UltArc (03-15-2014), WD40 (02-23-2014), Xist (02-22-2014)
Alt Today
Popular topics

Other popular topics in this forum...

   
Old 02-22-2014, 04:26 PM   #2 (permalink)
Master EcoModder
 
redneck's Avatar
 
Join Date: Jun 2009
Location: SC Lowcountry
Posts: 1,795

Geo XL1 - '94 Geo Metro
Team Metro
Boat tails and more mods
90 day: 72.22 mpg (US)

Big, Bad & Flat - '01 Dodge Ram 3500 SLT
Team Cummins
90 day: 21.13 mpg (US)
Thanks: 226
Thanked 1,353 Times in 711 Posts
.

Thanks for posting this info.


Question...

Quote:
As depicted,with optimized leading edge radii,smooth undersides,no cooling systems,side body camber,tumblehome,full tail,and practical windshield,and wheels,this form will produce Cd 0.12 .
I'm not familiar with "tumblehome". Could you elaborate ?



>
  Reply With Quote
The Following 2 Users Say Thank You to redneck For This Useful Post:
aerohead (02-22-2014), mikeyjd (04-01-2014)
Old 02-22-2014, 04:35 PM   #3 (permalink)
Master EcoModder
 
aerohead's Avatar
 
Join Date: Jan 2008
Location: Sanger,Texas,U.S.A.
Posts: 15,861
Thanks: 23,922
Thanked 7,207 Times in 4,640 Posts
tumblehome

Quote:
Originally Posted by redneck View Post
.

Thanks for posting this info.


Question...



I'm not familiar with "tumblehome". Could you elaborate ?



>
Tumblehome describes the amount with which the sides of the greenhouse tilt in towards the center of the car.
A Fed Ex delivery truck would have zero tumblehome,whereas a Corvette Stingray would have quite a bit.
Here's my CRX and it's inward-leaning greenhouse
__________________
Photobucket album: http://s1271.photobucket.com/albums/jj622/aerohead2/
  Reply With Quote
The Following 4 Users Say Thank You to aerohead For This Useful Post:
California98Civic (06-27-2014), mikeyjd (04-01-2014), redneck (02-22-2014), wmjinman (07-19-2014)
Old 02-22-2014, 04:48 PM   #4 (permalink)
Spaced out...
 
spacemanspif's Avatar
 
Join Date: Jul 2013
Location: Dirty Jersey
Posts: 748

The New Focus - '07 Ford Focus ZX5
90 day: 32.44 mpg (US)
Thanks: 142
Thanked 205 Times in 149 Posts
Could you explain what is going on in the last pic of the different car designs? I understand the inflatable tail above it, but am lost when it comes to that contraption on the back of the last one, and why it doesn't have an accompanying pic next to it or airflow lines. It can't possibly have 0 drag at the rear, can it?
__________________
-Mike

2007 Ford Focus ZX5 - 91k - SGII, pending upper and lower grill bocks - auto trans
1987 Monte Carlo SS - 5.3/4L80E swap - 13.67 @ 106
2007 Ford Focus Estate - 230k - 33mpg - Retired 4/2018
1995 Saturn SL2 - 256K miles - 44mpg - Retired 9/2014

Cost to Operate Spreadsheet for "The New Focus"

  Reply With Quote
Old 02-22-2014, 05:02 PM   #5 (permalink)
Master EcoModder
 
aerohead's Avatar
 
Join Date: Jan 2008
Location: Sanger,Texas,U.S.A.
Posts: 15,861
Thanks: 23,922
Thanked 7,207 Times in 4,640 Posts
last pic

Quote:
Originally Posted by spacemanspif View Post
Could you explain what is going on in the last pic of the different car designs? I understand the inflatable tail above it, but am lost when it comes to that contraption on the back of the last one, and why it doesn't have an accompanying pic next to it or airflow lines. It can't possibly have 0 drag at the rear, can it?
The last picture is a schematic diagram of the boat tail envelope deflated and storing into,or against the back of the car.
The flow lines are depicted for it's 'deployed' configuration above,and for it's 'stowed' configuration 3rd from the bottom.
The 3rd from bottom and last car would be about Cd 0.25.
The 2nd from bottom would be lower.
__________________
Photobucket album: http://s1271.photobucket.com/albums/jj622/aerohead2/
  Reply With Quote
The Following User Says Thank You to aerohead For This Useful Post:
mikeyjd (04-01-2014)
Old 02-23-2014, 03:02 PM   #6 (permalink)
Master EcoModder
 
freebeard's Avatar
 
Join Date: Aug 2012
Location: northwest of normal
Posts: 27,561
Thanks: 7,736
Thanked 8,554 Times in 7,041 Posts
Here's a sketch I did in the 1980s. The retractable wheel and non-retractable exhaust weren't completely thought out.



This was my thinking in the 90s: find the point of separation and cut off everything aft of that.



Here's my thinking today: six blisters on the aeroform.

  Reply With Quote
Old 02-23-2014, 03:53 PM   #7 (permalink)
...beats walking...
 
Join Date: Jul 2009
Location: .
Posts: 6,190
Thanks: 179
Thanked 1,525 Times in 1,126 Posts
Summary: Kamm-back is about 3-dimensionally minimizing the "volume" of the virtual truncated (vortex?) AIR cone that's drug along behind the vehicle.
  Reply With Quote
The Following User Says Thank You to gone-ot For This Useful Post:
aerohead (02-26-2014)
Old 02-26-2014, 11:46 AM   #8 (permalink)
Master EcoModder
 
aerohead's Avatar
 
Join Date: Jan 2008
Location: Sanger,Texas,U.S.A.
Posts: 15,861
Thanks: 23,922
Thanked 7,207 Times in 4,640 Posts
six blisters

from Lay's research (a future post) we might slide on the windshield/cowl area (he got same drag with ideal,or 'conventional' windshield).The sides and tail are key,so rest of blisters would do a nice cleanup.
__________________
Photobucket album: http://s1271.photobucket.com/albums/jj622/aerohead2/
  Reply With Quote
The Following User Says Thank You to aerohead For This Useful Post:
mikeyjd (04-01-2014)
Old 02-26-2014, 01:41 PM   #9 (permalink)
Master EcoModder
 
Ecky's Avatar
 
Join Date: Dec 2011
Location: New Zealand
Posts: 5,005

ND Miata - '15 Mazda MX-5 Special Package
90 day: 42.54 mpg (US)
Thanks: 2,866
Thanked 2,501 Times in 1,547 Posts
Has there been any talk of production of inflatable boat tails for existing vehicles?
  Reply With Quote
Old 02-26-2014, 03:07 PM   #10 (permalink)
Master EcoModder
 
freebeard's Avatar
 
Join Date: Aug 2012
Location: northwest of normal
Posts: 27,561
Thanks: 7,736
Thanked 8,554 Times in 7,041 Posts
Quote:
from Lay's research (a future post) we might slide on the windshield/cowl area (he got same drag with ideal,or 'conventional' windshield).The sides and tail are key,so rest of blisters would do a nice cleanup.
246 people have looked at my Beetle Aerodynamics thread. Were you one?



This follows Breers more than the Template.


  Reply With Quote
The Following 2 Users Say Thank You to freebeard For This Useful Post:
Hersbird (03-08-2014), mikeyjd (04-01-2014)
Reply  Post New Thread


Thread Tools




Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Content Relevant URLs by vBSEO 3.5.2
All content copyright EcoModder.com