Oi.
Oi,
Been lerking without an account quite a while now... finally got to signing up. XD Would bother trying intelligent things with my current car. But well... For one it's a V6 Buick Centry 92' monster. And for two, it's currently running on 3-5 cylinders most of the time. ^.^' And zi auto shops? They don't wana touch it--and I don't blame them one bit. That said, wasn't a bad car for a low maintenance car I learned to drive in... *mumbles* Hoping that cylinder problem turns out to just be a bad connection somewhere... *has been working on cleaning all the car's rusty electrical connections and checking for bad wires when possible* >.< Why is it cars always have such terribad weather protection on contacts? That said, I have alot of crazy ideas fumbling around in the back of my head. ^.^ A number of which from time to time pertain to the replacement for the above monstrosity. I love fiddling with electronics... in particular. Some formal, some impromptu knowledge there. The latter is something of my specialty ^.^... Have welded a little. Have done a little cad. Pretty much the "oooh, that looks like a fun skill to pick up" person, who manages to keep interest JUST long enough to learn the rudimentary basics XD... (>.< Tho I almost got the very first level of arc welding cert half a semester in... One... flaw... And lemme tell ya, them sticks were in HORRID shape. Damn flaw was from nearly a centimeter of the stick popping off mid weld. Not much I could do but sigh. XD At least the instructor no longer looked at me as "that random computer geek"...) Currently in college working toward either a Computer Engineering degree or Japanese Language degree... hard to tell which sometimes. Not all that far along said either. Then again, I learn what is interesting/useful to me to learn... so... If you couldn't guess. I've had an account over at diyelectriccar a bit longer, more my direction of interest. :3 That said ya folks have some pretty stuff here in that regards too. As for other matters... Sadly, I'm among the common group who cannot stand driving Stick in a car... Mostly due to the clutch. *sighs* Left foot co-ordination is a lot to ask from me. Never was good at it playing soccer, still ain't good at it driving. Though I've driven a clutch-petal-less manual once, wish they were a bit more common... Ah well. ^.^' Not like I could afford one if they were. Mmm. And my last bit. I once said "It ain't a project if something doesn't go up in smoke during it." to someone. I'm sure these words have been said by many greater than me... ^.^ ... Then again. I'm not sure if many of them were pyros... |
Welcome to ecomodder!
|
you might want to try welding with a wire-feed MIG. I found them easier then stick.
And give clutches another chance. :) Welcome to ecomodder! |
Welcome to Ecomodder!
Keep us up to date on your experiences. |
It is said that one reason for the popularity of the Austin 7 with tinkerers was that if you changed something, it was usually an improvement. Getting back up to stock performance can be a fine primary education, too.
|
All times are GMT -4. The time now is 11:48 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Content Relevant URLs by vBSEO 3.5.2
All content copyright EcoModder.com