Go Back   EcoModder Forum > EcoModding > EcoModding Central
Register Now
 Register Now
 

Reply  Post New Thread
 
Submit Tools LinkBack Thread Tools
Old 08-13-2010, 06:10 AM   #1 (permalink)
aero guerrilla
 
Piwoslaw's Avatar
 
Join Date: Oct 2008
Location: Warsaw, Poland
Posts: 3,691

Svietlana II - '13 Peugeot 308SW e-HDI 6sp
90 day: 58.1 mpg (US)
Thanks: 1,268
Thanked 721 Times in 458 Posts
One block heater or two?

I believe I have found a block heater for my engine, and I think my engine block has 2 plugged holes in the back, so the question is: Is one heater enough, or should I install two?

With two heaters the engine will heat up faster, which is good when I need the car on short notice. Also, I should get a higher engine temperature on cold winter mornings. And if one stops working I still have the other.

On the other hand, two heaters is twice the current draw, so wires may need to be beefed up. Also, the cost is not too easy to swallow (100€ each, plus installation).

So, will the gains of adding a second block heater be worth the extra costs? Or maybe instead of the second block heater a small glue-on oil pan heater would be more worth while?

__________________
e·co·mod·ding: the art of turning vehicles into what they should be

What matters is where you're going, not how fast.

"... we humans tend to screw up everything that's good enough as it is...or everything that we're attracted to, we love to go and defile it." - Chris Cornell


[Old] Piwoslaw's Peugeot 307sw modding thread
  Reply With Quote
Alt Today
Popular topics

Other popular topics in this forum...

   
Old 08-13-2010, 07:13 AM   #2 (permalink)
Administrator
 
Daox's Avatar
 
Join Date: Dec 2007
Location: Germantown, WI
Posts: 11,203

CM400E - '81 Honda CM400E
90 day: 51.49 mpg (US)

Daox's Grey Prius - '04 Toyota Prius
Team Toyota
90 day: 49.53 mpg (US)

Daox's Insight - '00 Honda Insight
90 day: 64.33 mpg (US)

Swarthy - '14 Mitsubishi Mirage DE
Mitsubishi
90 day: 56.69 mpg (US)

Daox's Volt - '13 Chevrolet Volt
Thanks: 2,501
Thanked 2,585 Times in 1,553 Posts
The last time I saw a block heater cost analysis it basically broke even (but you still get the benefits of heat sooner). I do agree that two would be nice for quick heat up and less heat loss due to the quicker heat up.
__________________
Current project: A better alternator delete
  Reply With Quote
Old 08-13-2010, 08:38 AM   #3 (permalink)
Left Lane Ecodriver
 
RobertSmalls's Avatar
 
Join Date: Aug 2008
Location: Buffalo, NY, USA
Posts: 2,257

Prius C - '12 Toyota Prius C
Thanks: 79
Thanked 286 Times in 199 Posts
My hunch is that two heaters will heat you up more than twice as fast as a single heater. While you're waiting for your engine to get hot, it's shedding heat to its environment, and the less time you spend doing that, the greater the efficiency. But you'd have to be more careful about how long you leave it running, so as not to waste too much electricity.

Worth an extra >100 Euro? Probably not.

Are you sure you can't get a $20 block heater off Amazon.com?
  Reply With Quote
Old 08-13-2010, 09:07 AM   #4 (permalink)
aero guerrilla
 
Piwoslaw's Avatar
 
Join Date: Oct 2008
Location: Warsaw, Poland
Posts: 3,691

Svietlana II - '13 Peugeot 308SW e-HDI 6sp
90 day: 58.1 mpg (US)
Thanks: 1,268
Thanked 721 Times in 458 Posts
Quote:
Originally Posted by RobertSmalls View Post
Are you sure you can't get a $20 block heater off Amazon.com?
I wish. From the scarce information I've found, my engine block's holes are some weird shape, hence the need for an almost custom made heating element. DEFA makes heaters for most cars, and the only reason they offer those non-standard models is b/c of the Scandinavian market. From my discussions at the local forums, and with mechanics, I seem to be the only person who knows that block heaters can be used south of Scandinavia
__________________
e·co·mod·ding: the art of turning vehicles into what they should be

What matters is where you're going, not how fast.

"... we humans tend to screw up everything that's good enough as it is...or everything that we're attracted to, we love to go and defile it." - Chris Cornell


[Old] Piwoslaw's Peugeot 307sw modding thread
  Reply With Quote
Old 08-13-2010, 09:19 AM   #5 (permalink)
Left Lane Ecodriver
 
RobertSmalls's Avatar
 
Join Date: Aug 2008
Location: Buffalo, NY, USA
Posts: 2,257

Prius C - '12 Toyota Prius C
Thanks: 79
Thanked 286 Times in 199 Posts
There is always the coolant circulating type: Amazon.com: Kat's 13100 1000 Watt Alumininum Circulating Tank…
  Reply With Quote
Old 08-13-2010, 09:32 AM   #6 (permalink)
Master EcoModder
 
comptiger5000's Avatar
 
Join Date: Feb 2010
Location: CT, USA
Posts: 544

RaceJeep - '98 Jeep Grand Cherokee (ZJ) 5.9 Limited
90 day: 13.62 mpg (US)
Thanks: 1
Thanked 26 Times in 23 Posts
I'd personally go with a higher powered circulating type, such as the one posted above, or a KIM Hotstart installed in the heater hoses. They're not too expensive, and are a pretty much universal install. Either a 500 watt or 1000 watt should heat it up nicely.
__________________
Call me crazy, but I actually try for mpg with this Jeep:



Typical driving: Back in Rochester for school, driving is 60 - 70% city
  Reply With Quote
Old 08-13-2010, 11:56 AM   #7 (permalink)
Master EcoModder
 
Join Date: Jun 2010
Location: scotland
Posts: 1,429

The Mistress - '88 Bmw 320i Touring SE
Team m8
Last 3: 27.17 mpg (US)

Germany Beadle - '91 Mercedes 300td (estate, N/A)
90 day: 24.63 mpg (US)

The Bloodylingo - '05 Citroen Berlingo Multispace Desire
90 day: 39.77 mpg (US)

Shanner Scaab - '03 Saab 9-5 estate Vector
90 day: 26.19 mpg (US)

Clio 182 - '05 Renault Clio RS 182 182
90 day: 31.73 mpg (US)
Thanks: 89
Thanked 89 Times in 74 Posts
Quote:
Originally Posted by RobertSmalls View Post
There is always the coolant circulating type: Amazon.com: Kat's 13100 1000 Watt Alumininum Circulating Tank?
hi, can these 'pipe mounted' circulators ensure that the coolant in the block is heated? If so how do they bypass the thermostat?

If they only heat the coolant from thermostat to rad, then they wouldnt speed up the time for the block to get to operating temp?

With a block heater as the OP has suggested, you'd be heating what needs heated?
  Reply With Quote
Old 08-13-2010, 12:06 PM   #8 (permalink)
Administrator
 
Daox's Avatar
 
Join Date: Dec 2007
Location: Germantown, WI
Posts: 11,203

CM400E - '81 Honda CM400E
90 day: 51.49 mpg (US)

Daox's Grey Prius - '04 Toyota Prius
Team Toyota
90 day: 49.53 mpg (US)

Daox's Insight - '00 Honda Insight
90 day: 64.33 mpg (US)

Swarthy - '14 Mitsubishi Mirage DE
Mitsubishi
90 day: 56.69 mpg (US)

Daox's Volt - '13 Chevrolet Volt
Thanks: 2,501
Thanked 2,585 Times in 1,553 Posts
They go on the lines that go to the heater core I believe.
__________________
Current project: A better alternator delete
  Reply With Quote
Old 08-13-2010, 12:09 PM   #9 (permalink)
Left Lane Ecodriver
 
RobertSmalls's Avatar
 
Join Date: Aug 2008
Location: Buffalo, NY, USA
Posts: 2,257

Prius C - '12 Toyota Prius C
Thanks: 79
Thanked 286 Times in 199 Posts
You install it on the engine side of the thermostat, e.g. in the heater bypass hose. Downside: it circulates the heat through the heater core if you parked the car with the heater on. You'll spend electricity heating the cabin, not just the engine.

Edit: aw, you beat me to it, Daox.
  Reply With Quote
Old 08-13-2010, 03:19 PM   #10 (permalink)
Master EcoModder
 
Join Date: Jun 2010
Location: scotland
Posts: 1,429

The Mistress - '88 Bmw 320i Touring SE
Team m8
Last 3: 27.17 mpg (US)

Germany Beadle - '91 Mercedes 300td (estate, N/A)
90 day: 24.63 mpg (US)

The Bloodylingo - '05 Citroen Berlingo Multispace Desire
90 day: 39.77 mpg (US)

Shanner Scaab - '03 Saab 9-5 estate Vector
90 day: 26.19 mpg (US)

Clio 182 - '05 Renault Clio RS 182 182
90 day: 31.73 mpg (US)
Thanks: 89
Thanked 89 Times in 74 Posts
Quote:
Originally Posted by RobertSmalls View Post
You install it on the engine side of the thermostat, e.g. in the heater bypass hose. Downside: it circulates the heat through the heater core if you parked the car with the heater on. You'll spend electricity heating the cabin, not just the engine.

Edit: aw, you beat me to it, Daox.
thanks for the info fellas
It makes more sense now-but i see the issue regarding cabin heating.

Would it not be possible to insulate the block to minimise the time and amount of elec required to heat?

Essentially similar ro a thermos flask-the blok coolant would remain warmer for longer?

I have no idea how you'd do it-just puttin a possible solution out there that may cost less than a second block heater?

  Reply With Quote
Reply  Post New Thread


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Civic Block Heater Install TomO DIY / How-to 42 04-04-2012 08:24 PM
Unleashed my Chevy block heater (redneck re-engineering) Fubeca EcoModding Central 21 04-09-2011 06:30 AM
block heater questions. phord EcoModding Central 3 01-15-2010 11:18 AM
Geo Metro Block Heater How-to bbjsw10 DIY / How-to 75 12-31-2009 12:34 AM
1.5 L Toyota block heater bwilson4web Hybrids 11 12-24-2009 01:30 PM



Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Content Relevant URLs by vBSEO 3.5.2
All content copyright EcoModder.com