EcoModder.com

EcoModder.com (https://ecomodder.com/forum/)
-   Aerodynamics (https://ecomodder.com/forum/aerodynamics.html)
-   -   Semi-moon disc.. :) (https://ecomodder.com/forum/showthread.php/semi-moon-disc-4429.html)

Xringer 08-08-2008 12:36 PM

Semi-moon disc.. :)
 
I found some "Outdoor" duct tape at Lowes. Looking at the wrapper, it seemed
to be silver, like regular old duct tape..

http://i46.photobucket.com/albums/f1...r/CRV/M083.jpg
check out the shorty mudflaps..
http://i46.photobucket.com/albums/f1...r/CRV/M089.jpg

As you can see, it's really dark gray. Nowhere near the shiny silver I wanted..

Anyways, this tape job saves gas instantly! Without even starting the ICE!
My CRV is so ugly, the girls won't ride in it anymore! More gas savings!!

As for actual driving, this mod is going to be a real challenge to test.. If it works, I'll think about adding some little skirts on the back wheel wells. There is an awfully big opening just above the tires! :o

Maybe I should also cover over those holes in the 6 roof rack brackets.?.

Cheers,
Rich

Daox 08-08-2008 12:44 PM

I don't think it looks too bad. At least I've seen worse haha. Good for testing. Let us know how it works out.

Tourigjm 08-08-2008 12:44 PM

maybe extend the tape to the center of the hub for a smoother surface.

I wonder what kind of vortex that hole creates?

aerohead 08-08-2008 03:56 PM

hole
 
Quote:

Originally Posted by Tourigjm (Post 52040)
maybe extend the tape to the center of the hub for a smoother surface.

I wonder what kind of vortex that hole creates?

The Renault Vesta-II had a single hole in their wheel covers,for brake cooling and valve stem access.A very practical solution and compromise.And at 146-mpg,had little impact on overall performance.

Bror Jace 08-09-2008 11:50 AM

Cool move Xringer! :thumbup:

Next step? Lose the roof rack. ;)

Xringer 08-09-2008 01:02 PM

Quote:

Originally Posted by Bror Jace (Post 52286)
Cool move Xringer! :thumbup:

Next step? Lose the roof rack. ;)


No way Jose! The rack gets a lot of use.. But, I am thinking about taping up
all those holes in the (6) brackets.

http://i46.photobucket.com/albums/f1.../rackmount.jpg

They are pretty flat on the back and not so bad on the outside either.
I think they could be taped down pretty easily.. Heck, I bet no one would even notice..

cfg83 08-09-2008 03:41 PM

Xringer -

I like them because I like asymmetry in design. They remind me of the old reel-to-reel computer tapes that you'd see in the NASA control rooms.

CarloSW2

cfg83 08-09-2008 03:44 PM

Xringer -

Quote:

Originally Posted by Xringer (Post 52297)
No way Jose! The rack gets a lot of use.. But, I am thinking about taping up
all those holes in the (6) brackets.

...

They are pretty flat on the back and not so bad on the outside either.
I think they could be taped down pretty easily.. Heck, I bet no one would even notice..

I would try to retrofit a removable cover that turns the rack into a streamlined "fin".

CarloSW2

Bror Jace 08-09-2008 08:50 PM

You USE the roof rack??? :eek:

Wow, an SUV owner who uses his roof rack ... who woulda thunk it? :confused:

Xringer 08-09-2008 10:06 PM

Quote:

Originally Posted by cfg83 (Post 52318)
Xringer -



I would try to retrofit a removable cover that turns the rack into a streamlined "fin".

CarloSW2

Wait a sec! This is starting to sound like a lot of work!!
I'll tape the holes up and lower my AM/FM antenna half way down,
but that's it for the roof area..

If I can't hit my goal of 35 highway, then I'm going to start thinking about
the underbelly. Maybe some cute little tire dams. :)


All times are GMT -4. The time now is 07:06 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Content Relevant URLs by vBSEO 3.5.2
All content copyright EcoModder.com