Difference between revisions of "X-Gauge Commands Repertory"
From EcoModder Forum Wiki
(Created page with "{{Open ReVolt Header}} :Any voltage input in the range of 0 to 144v. :15.6 kHz switching frequency. :Adjustable hardware overcurrent shutdown in the range 495 amps to 776 amp...") |
(No difference)
|
Revision as of 17:06, 9 July 2018
The Open ReVolt Project: Wiki main page | Paul's website | Forum thread | Donate
- Any voltage input in the range of 0 to 144v.
- 15.6 kHz switching frequency.
- Adjustable hardware overcurrent shutdown in the range 495 amps to 776 amps.
- Hardware over-current shuts down in 3-4 µs. [1]
- RS-232 interface.
- Reprogrammable.
- High pedal lockout.
- The controller will not close the main contactor if the mosfets have failed shorted.
- Protection from many potentially destructive errors: [2]
- Control board power polarity reversed
- 12V supply connected to throttle
- Full throttle at 0 RPM
