Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post

Natalya · 08-05-2017, 04:12 PM

I'm bumping this thread. I still have pre-programmed Auto-Stop chips for sale for $18 shipped anywhere in the USA or $15 if picked up in person near Atlanta, GA.

I also have a pre-made PCB that I will sell for $43 shipped or $40 picked up anywhere near Atlanta. This is the board in question:

If you have a clutch switch in your G1 Insight (I cannot recommend a clutch switch more highly, you absolutely should get one if you have a manual, even if you don't want an Auto-Stop button) then this PCB will let you install an Auto-Stop button without any interference from the clutch switch.

I'm going to re-design this board with different components later, but I've tested this one and it works, and it's very similar to the older one I use in my car.

The red switch is for forwards compatibility with a possible future software update. Just leave it in position 1 for now.

Anyway, private message me here or on Insight Central if you want this PCB.

Also:
If you don't have a clutch switch yet you could still install this and get EFAS and then decide to install a clutch switch later.

08-05-2017, 04:12 PM	#55 (permalink)
Natalya Engine-Off-Coast Join Date: Apr 2016 Location: Atlanta Posts: 561 Red 2000 Insight (2017 through 2019) - '00 Honda Insight 5MT 90 day: 64.72 mpg (US) Red 2000 Lithium Insight (2020) - '00 Honda Insight LTO 90 day: 71.76 mpg (US) Thanks: 223 Thanked 305 Times in 175 Posts	I'm bumping this thread. I still have pre-programmed Auto-Stop chips for sale for $18 shipped anywhere in the USA or $15 if picked up in person near Atlanta, GA. I also have a pre-made PCB that I will sell for $43 shipped or $40 picked up anywhere near Atlanta. This is the board in question: If you have a clutch switch in your G1 Insight (I cannot recommend a clutch switch more highly, you absolutely should get one if you have a manual, even if you don't want an Auto-Stop button) then this PCB will let you install an Auto-Stop button without any interference from the clutch switch. I'm going to re-design this board with different components later, but I've tested this one and it works, and it's very similar to the older one I use in my car. The red switch is for forwards compatibility with a possible future software update. Just leave it in position 1 for now. Anyway, private message me here or on Insight Central if you want this PCB. Also: If you don't have a clutch switch yet you could still install this and get EFAS and then decide to install a clutch switch later. __________________ Red 2000 Insight (2017 through 2019) Black 2010 Insight (Sold) Silver 2001 Insight (Sold)