Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post

electromike · 05-27-2009, 08:37 AM

Here is an idea to detect on when to go into re-init loop:

Set up a failed byte read count, reset on each successful read.
Once counter reaches say. 15 (about 5 seconds divided by about .3 seconds per read) send the device into re-init mode.

05-27-2009, 08:37 AM	#398 (permalink)
electromike EcoModding Lurker Join Date: Oct 2008 Location: nova scotia Posts: 35 Thanks: 2 Thanked 0 Times in 0 Posts	Here is an idea to detect on when to go into re-init loop: Set up a failed byte read count, reset on each successful read. Once counter reaches say. 15 (about 5 seconds divided by about .3 seconds per read) send the device into re-init mode.