|
@vinny1989 - 30mph in 5th seems a bit too low for me but I do think ~35 is enough to shift it.
I've already acquired rev counter, just need to hook it up.
About LED's - I'm using them in fender indicators and front position lights. I've used them for rear plate illumination but one of them got damaged so I've installed regular bulbs and the remaining LED tube replaced the interior light. If I can acquire a nice, powerful set of LED bulbs for rear lights I will be very happy.
Proper LED daytime running lights are not a cheap mod though...
So the list:
# Belly pan - will try soon
# Flat hubcaps - will try soon (where do I get the dish like that?)
# Wiper deflector - will probably try
# Rev counter - in progress
# Partial or whole grill block (openable) - I'm not sure about this, summer is coming...
# Rear wheel skirts - I like the idea but it looks pretty weird
# Folding passenger side mirror whenever possible - That is not really a good idea for high traffic
# When replacing tires, replace with narrower - I have full set of pretty new summer rubber, but snow tires need a new pair
# Pump tires to at least max sidewall pressure minus 10% (i.e. 40psi if max is 44psi, etc.) - first I'd have to change my shock absorbers because ride gets pretty harsh with high pressure
# LED daytime running lights - Not a priority but I am going to buy a set if I get some cash
Kammback seems pretty invasive to me and I have doubts about it being useful for this shape of body.
Is regular corrugated plastic going to last when in close contact with exhaust or catalytic converter? Catalytic converter is the lowest point of Punto underbody (if my eyes were not fooling me).
|