Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post

Magister · 08-13-2009, 01:47 PM

(I have been busy earlier this year so there was delay for my OBDuino project)

I am working on a PCB, I already made a prototype but I am reworking it to be less than 5cm height so it will fit easily in a 1 DIN unit.

There is some pictures here
OBDuino Hardware

Note that this is a CAN version only. While I was working on it, I am happy to see some people enhanced the ISO version a lot!

Magister aka Frédéric.

08-13-2009, 01:47 PM	#1 (permalink)
Magister OBDuino coder Join Date: Jun 2008 Location: Montréal, QC Posts: 212 Titine - '13 Hyundai Sonata Hybrid Thanks: 3 Thanked 10 Times in 8 Posts	OBDuino CAN version only, progress! (I have been busy earlier this year so there was delay for my OBDuino project) I am working on a PCB, I already made a prototype but I am reworking it to be less than 5cm height so it will fit easily in a 1 DIN unit. There is some pictures here OBDuino Hardware Note that this is a CAN version only. While I was working on it, I am happy to see some people enhanced the ISO version a lot! Magister aka Frédéric. __________________ 2013 Hyundai Sonata Hybrid Last edited by Magister; 08-13-2009 at 03:02 PM..