Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post - Looking at the % of time injectors are open

diesel_john · 03-03-2008, 08:27 AM

Pete,
on a gasoline MFI engine, i just use an analog breaker points dwell meter to look at the degrees that an injector is open by connecting at the injector.

during hypermiling the needle stays in the bottom 20% of the meter.(seepost7) i was trying to figure away to get the meter up in the center of the scale.
it would be a real time based relative fuel meter.

03-03-2008, 08:27 AM	#3 (permalink)
diesel_john MP$ Join Date: Jan 2008 Location: SW Ohio Posts: 595 Thanks: 5 Thanked 19 Times in 14 Posts	Pete, on a gasoline MFI engine, i just use an analog breaker points dwell meter to look at the degrees that an injector is open by connecting at the injector. during hypermiling the needle stays in the bottom 20% of the meter.(seepost7) i was trying to figure away to get the meter up in the center of the scale. it would be a real time based relative fuel meter. Last edited by diesel_john; 03-05-2008 at 02:44 AM..