Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post - Paul & Sabrina's cheap DIY 144v motor controller

MPaulHolmes · 09-04-2009, 11:29 AM

FIRST, IF ANYONE HAS BOUGHT THE CONTROL BOARD BILL OF MATERIALS FROM THE WIKI, IT HAD A MISTAKE IN IT. R16 SHOULD BE 3K AND NOT 1K. I FIXED THE BOM TO REFLECT THIS CHANGE.

I'm going to triple check the other parts too. The circuit actually works with the rest of the stuff how it is, but I want to make sure it is all right anyway.

Hey Bob! My oscilloscope is working again. It is a little flickery sometimes, but I like the sense of danger of living on the edge!

09-04-2009, 11:29 AM	#2240 (permalink)
MPaulHolmes PaulH Join Date: Feb 2008 Location: Maricopa, AZ (sort of. Actually outside of town) Posts: 3,832 Michael's Electric Beetle - '71 Volkswagen Superbeetle 500000 Thanks: 1,368 Thanked 1,202 Times in 765 Posts	FIRST, IF ANYONE HAS BOUGHT THE CONTROL BOARD BILL OF MATERIALS FROM THE WIKI, IT HAD A MISTAKE IN IT. R16 SHOULD BE 3K AND NOT 1K. I FIXED THE BOM TO REFLECT THIS CHANGE. I'm going to triple check the other parts too. The circuit actually works with the rest of the stuff how it is, but I want to make sure it is all right anyway. Hey Bob! My oscilloscope is working again. It is a little flickery sometimes, but I like the sense of danger of living on the edge! __________________ kits and boards Last edited by MPaulHolmes; 09-04-2009 at 11:54 AM..