Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post - Paul & Sabrina's cheap DIY 144v motor controller

MPaulHolmes · 10-08-2009, 11:55 PM

If it's switching too fast, you can change R16 to maybe 4.7kOhm. I believe right now it's 6.8 kOhm. Or, you could increase R15 to 330 Ohm instead of 220 Ohm. Or make the gate resistors bigger. hehe.

10-08-2009, 11:55 PM	#2388 (permalink)
MPaulHolmes PaulH Join Date: Feb 2008 Location: Maricopa, AZ (sort of. Actually outside of town) Posts: 3,832 Michael's Electric Beetle - '71 Volkswagen Superbeetle 500000 Thanks: 1,362 Thanked 1,202 Times in 765 Posts	If it's switching too fast, you can change R16 to maybe 4.7kOhm. I believe right now it's 6.8 kOhm. Or, you could increase R15 to 330 Ohm instead of 220 Ohm. Or make the gate resistors bigger. hehe. __________________ kits and boards Last edited by MPaulHolmes; 10-09-2009 at 12:04 AM..