Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post - Rapid-Prototyping Aero Parts

NeilBlanchard · 10-10-2009, 10:53 PM

Hi,

Printing in 3D is now quite possible, but you are limited to the dimensions of the printing chamber of the printer. Often this is 8"x8"x10", but things can be glued together from pieces.

First, you have to have a CAD model, though.

10-10-2009, 10:53 PM	#5 (permalink)
NeilBlanchard Master EcoModder Join Date: May 2008 Location: Maynard, MA Eaarth Posts: 7,907 Mica Blue - '05 Scion xA RS 2.0 Team Toyota 90 day: 42.48 mpg (US) Forest - '15 Nissan Leaf S Team Nissan 90 day: 156.46 mpg (US) Number 7 - '15 VW e-Golf SEL TEAM VW AUDI Group 90 day: 155.81 mpg (US) Thanks: 3,475 Thanked 2,950 Times in 1,844 Posts	Hi, Printing in 3D is now quite possible, but you are limited to the dimensions of the printing chamber of the printer. Often this is 8"x8"x10", but things can be glued together from pieces. First, you have to have a CAD model, though. __________________ Sincerely, Neil http://neilblanchard.blogspot.com/