Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post - Any interest in developing an open source fuel economy gauge/computer?

diesel_john · 03-21-2008, 10:19 PM

MAF description
MAF meter details

dcb
i finally get what your saying about putting a MAF on carb'd engine, i bet once cal'd to an individual engine and speedo, it would give good real time fuel economy. Pounds of divided by about 13 or 14 gives pounds of fuel. And if some thing changed in the engine, the tank fill numbers would alert the operator. Of practical importance, would be the ability to teak cal. numbers without going through the whole cal. routine again.

03-21-2008, 10:19 PM	#70 (permalink)
diesel_john MP$ Join Date: Jan 2008 Location: SW Ohio Posts: 595 Thanks: 5 Thanked 19 Times in 14 Posts	MAF details MAF description MAF meter details dcb i finally get what your saying about putting a MAF on carb'd engine, i bet once cal'd to an individual engine and speedo, it would give good real time fuel economy. Pounds of divided by about 13 or 14 gives pounds of fuel. And if some thing changed in the engine, the tank fill numbers would alert the operator. Of practical importance, would be the ability to teak cal. numbers without going through the whole cal. routine again. Attached Thumbnails Last edited by diesel_john; 03-23-2008 at 02:23 AM..