Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post - Any interest in developing an open source fuel economy gauge/computer?

dcb · 03-23-2008, 09:52 AM

FYI, I put a "plan" on the sourceforge discussion group, I'm thinking that we might want to get geekey with the geeks and do some of the discussion over there.

https://sourceforge.net/forum/messag...msg_id=4859237

FYI, Coyote and S2, I had an epifinay (SP?). We don't need to reinvent a protocol to talk to the palm, we should just use the elmscan protocol and maybe make up a few "pids" for injector duty cycle data. That way folks have the option of using existing elmscan software/devices to get basic vehicle information from pre-96 vehicles as well. The AT commands are in http://www.elmelectronics.com/DSheets/ELM323DS.pdf and I will be putting a sample serial "conversation" to exercise/test the palm with.

03-23-2008, 09:52 AM	#96 (permalink)
dcb needs more cowbell Join Date: Feb 2008 Location: ÿ Posts: 5,038 pimp mobile - '81 suzuki gs 250 t 90 day: 96.29 mpg (US) schnitzel - '01 Volkswagen Golf TDI 90 day: 53.56 mpg (US) Thanks: 158 Thanked 269 Times in 212 Posts	FYI, I put a "plan" on the sourceforge discussion group, I'm thinking that we might want to get geekey with the geeks and do some of the discussion over there. https://sourceforge.net/forum/messag...msg_id=4859237 FYI, Coyote and S2, I had an epifinay (SP?). We don't need to reinvent a protocol to talk to the palm, we should just use the elmscan protocol and maybe make up a few "pids" for injector duty cycle data. That way folks have the option of using existing elmscan software/devices to get basic vehicle information from pre-96 vehicles as well. The AT commands are in http://www.elmelectronics.com/DSheets/ELM323DS.pdf and I will be putting a sample serial "conversation" to exercise/test the palm with. __________________ WINDMILLS DO NOT WORK THAT WAY!!!