View Single Post
Old 02-22-2010, 03:55 PM   #8 (permalink)
thatguitarguy
Master EcoModder
 
Join Date: Nov 2009
Location: Leadville, CO
Posts: 509

Maroon Ballon - '98 Chrysler Town & Country LXI
90 day: 26.42 mpg (US)

MaEsTRO - '95 Geo Metro 5spd hatch, 3 cyl
Thanks: 47
Thanked 54 Times in 38 Posts
If you have a circular saw you can kerf the inside of a sheet of Masonite and it will curve a lot easier. Masonite is about 1/8" thick, so set the saw to about 1/16" deep and cut lines 1" apart perpendicular to the way you want the board to curve, or for a curved edge you can cut the lines closer together.
  Reply With Quote