Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post

Amro · 05-15-2010, 09:49 AM

Hi folks,

I really need to ask a dumb question; My pwm-controller (sevcon MOS90) diagonstic led flashes 5 times when selecting drive. According to the manual that could mean an contactor problem or "open circuit motor". I connected + and - from the batteries to the motor and it runs bothways. I presume that there's no open circuit in the motor but I'm not entirely sure...

TIA

Amro

05-15-2010, 09:49 AM	#1 (permalink)
Amro EcoModding Lurker Join Date: May 2009 Location: zeist,utrecht,netherlands Posts: 8 Thanks: 2 Thanked 0 Times in 0 Posts	Testing for an open ciruit in a DC motor Hi folks, I really need to ask a dumb question; My pwm-controller (sevcon MOS90) diagonstic led flashes 5 times when selecting drive. According to the manual that could mean an contactor problem or "open circuit motor". I connected + and - from the batteries to the motor and it runs bothways. I presume that there's no open circuit in the motor but I'm not entirely sure... TIA Amro