Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post - F-150

round.boater · 05-31-2010, 04:38 PM

Finally getting around to posting what I've done to my truck thus far.

First: Scanguage placed over the hole that used to have a cigarette lighter. The cable is run through the dash into the port. You can also see the backup camera. I still need to put on a switch inline since the 12v outlet is always on - a leftover from when it powered the cig lighter...

Baseline numbers were 14 city & 17 hwy.

Drilling into the pop-in plastic pieces in the dash is the only thing I have done that isn't completely reversible to stock, and I figure they can't be too hard to replace if it comes to that. So far, that's kept the family at peace over the projects.

05-31-2010, 04:38 PM	#1 (permalink)
round.boater EcoModding Lurker Join Date: Dec 2008 Location: Aurora, CO Posts: 45 Thanks: 2 Thanked 11 Times in 6 Posts	F-150 Finally getting around to posting what I've done to my truck thus far. First: Scanguage placed over the hole that used to have a cigarette lighter. The cable is run through the dash into the port. You can also see the backup camera. I still need to put on a switch inline since the 12v outlet is always on - a leftover from when it powered the cig lighter... Baseline numbers were 14 city & 17 hwy. Drilling into the pop-in plastic pieces in the dash is the only thing I have done that isn't completely reversible to stock, and I figure they can't be too hard to replace if it comes to that. So far, that's kept the family at peace over the projects. Attached Thumbnails __________________ Last edited by round.boater; 05-31-2010 at 05:14 PM..