Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post - Making my own A pillar pods, how should I adhere these?

Chris D. · 04-06-2008, 02:12 AM

Im making my own A pillar pod using the stock trim and wanted to see if anyone had any recommendations for adhering these to the trim to its bullitproof

I'll post up some more pictures for a FAQ on how I made this..

reason I'm making my own is because a company called lotek I purchased one from and the guages aimed outside toward the window..

not for me, so I make my own

mine is going to hug the A pillar closely..

So if you guys could give me some ideas of how to make this work the best, that would be greatly appreciated..

I believe the black plastic is ABS..

04-06-2008, 02:12 AM	#1 (permalink)
Chris D. EcoModding Minded Join Date: Jan 2008 Location: Eagan, MN Posts: 667 Lunar Mist - '02 Toyota Tacoma SR5 90 day: 25.31 mpg (US) Silver Streak - '08 Toyota Corolla S 90 day: 38.25 mpg (US) Thanks: 67 Thanked 25 Times in 12 Posts	Making my own A pillar pods, how should I adhere these? Im making my own A pillar pod using the stock trim and wanted to see if anyone had any recommendations for adhering these to the trim to its bullitproof I'll post up some more pictures for a FAQ on how I made this.. reason I'm making my own is because a company called lotek I purchased one from and the guages aimed outside toward the window.. not for me, so I make my own mine is going to hug the A pillar closely.. So if you guys could give me some ideas of how to make this work the best, that would be greatly appreciated.. I believe the black plastic is ABS.. __________________