Quote:
Originally Posted by ECONORAM
I have noticed when driving my truck that if I have the cruise control engaged, the truck can go up to 100% load while climbing a hill. If I am using the throttle, I can only hit about 92% load before the tranny will downshift.
|
I have noticed something similar om my cruise as well a couple of times, but this was before I got the ScanGauge, so I don't have any numbers. Sometimes it will bleed off speed uphill to avoid releasing the TC or downshift, but other times it will downshift almost at once the speed drops below set. I have not found any pattern in this, though.