Quote:
Originally Posted by DavidP
Thank you for the offer Ryland ...
I'm sure there's a few people who would be interested in those 19 spline drive shafts ...
|
I am working on a 48Volt golf cart mod to be put into a early Metro Contertible. If there might be an extra 19 spline shaft out there I would really be interested in one. I would not car if they were slightly miss sized. I am starting to design a new end plate for the motor. I got some good ideas from a go cart mod with a golf cart motor. He made his own end plate and bearing housings. I already have my 275 amp Curtis Controller and Sepex 48v motor. I plan on making my own pedal/pot box. I found a place that sells the same pot as a P6 box for $33.00.
I am going to try and keep the clutch function. Which I hope will give me a top speed of 45 or 50. I also have been pondering a secondary Etek clone from Ebay at 48v as a power/hill/acceleration booster running off an electric clutch.
Just starting but very excited, after months of research. Please keep me in mind if any extra 19 spline shafts become available.