Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post - Paul & Sabrina's cheap DIY 144v motor controller

voltmatic automaton · 07-07-2010, 05:17 PM

well, i don't have a scope so thats difficult.
the previous post mentioned an intermediate board, that sounds promising.

heres a better picture and explaination of my current setup.
if you guys are sure i can stick with 12 volts as a driver then ok, but if 15v would be more definite that would be completely do-able.

07-07-2010, 05:17 PM	#3533 (permalink)
voltmatic automaton EcoModding Lurker Join Date: Jun 2010 Location: Texas Posts: 30 Thanks: 0 Thanked 1 Time in 1 Post	Decreasing IGBT heat well, i don't have a scope so thats difficult. the previous post mentioned an intermediate board, that sounds promising. heres a better picture and explaination of my current setup. if you guys are sure i can stick with 12 volts as a driver then ok, but if 15v would be more definite that would be completely do-able. Attached Thumbnails Last edited by voltmatic automaton; 07-07-2010 at 05:23 PM..