[bnmorgan]

Got my scangauge yesterday, and of course like a kid with a new toy went right to installing and figuring out how to do it.

Car spec first, 2001 Beetle TDI, 1.9L

I'm all good except the MPG, which if i understand has to be tuned or calibrated at fillup, which won't happen for another 1/2 tank or so (only at 300 miles now).

Problem is, my fWT blinks something that i think is overboard, ~205-210 at highway speed, but every few seconds, it will blink just long enough to read about. at crank this morning, it showed 73/80, but they swapped places along the way. My fIA shows ~98-105, which i figure is probably about right for 85-95 ambient temp and 5-10 lb boost.

Suggestions or tips? I did search the forum but didn't come up with anything, but y'all usually know things i don't on where to find things.

Thanks.