Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post - OBD-II port (how to run 2 gauges on one port)

thebrad · 04-08-2008, 10:56 PM

Thanks for the link CFG83, but like you stated probably not worth it. I'll just figure something else out.

More about CAN, it began being introduced in 2003/2004 and it's really not an OBD-II replacement from my new understanding it's really just a hub/router. The ECU sends a message to CAN then CAN assigns priority and sends it to the required assembly and OBD-II just regulates it. I understood it mainly because of my limited computer networking knowledge. But apparently the OBD naming convention will be kept, so I guess in the future we will have OBD-III to look forward to.

04-08-2008, 10:56 PM	#11 (permalink)
thebrad I REFUSE! Join Date: Apr 2008 Location: 92596 Posts: 262 VTEC Express - '96 Honda Civic CX 90 day: 57.72 mpg (US) Thanks: 0 Thanked 0 Times in 0 Posts	Thanks for the link CFG83, but like you stated probably not worth it. I'll just figure something else out. More about CAN, it began being introduced in 2003/2004 and it's really not an OBD-II replacement from my new understanding it's really just a hub/router. The ECU sends a message to CAN then CAN assigns priority and sends it to the required assembly and OBD-II just regulates it. I understood it mainly because of my limited computer networking knowledge. But apparently the OBD naming convention will be kept, so I guess in the future we will have OBD-III to look forward to. __________________