Quote:
Originally Posted by eimix
3. after displaying that there are CODE(S) OBDuino32K start showing PIDs, but all of them are wrong -24°C coolant temp, 17ltr/hour (instead of normal 1-2) could this be becouse OBDuino32K sends request for ECU error codes read, but is not reading them and all comunucation becomes corupted?
|
This is the exact same problem that i see too, not very surprising, since it is basically the same car.
Even the RPMs stay fixed at 1040 regardless of actual revolutions.
I think i should output some debugging stuff on a soft-uart.