Hi again!
one thing i cannot understand...
current and fuel average consumptions dont ''connect'' with litres used.
its like this:
if I calibrate guino using litres added method i get very low average consumtion, but overall consumpted litres are shown correct.
now I calibrated guino so it shows correct average consumtion, by adding X litres, driving X kilometers and calculating average. (litres/kilometers)*100=avg consumption
if it is calibrated this way, it shows i have used more fuel, then i have filled in tank.
example:
now i have filled 150 litres, travelled 1600km and guino shows correct 9.37 litres per 100 kilometers.
but fuel used is 200+ litres.
is there a mistake in calculations, or what?
|