Fuel Economy, Hypermiling, EcoModding News and Forum - EcoModder.com - View Single Post - Opengauge/MPGuino development: Freeduino signal processing

dcb · 04-16-2008, 10:40 AM

More notes:
Software might need to reject pulses that are too short, and/or disable pin 2 interrupts briefly after an injector pulse to filter out oscillations:
http://www.ecomodder.com/forum/showt...9906#post19906

Cannot have both LOW and HIGH interrupts on same pin, need to utilize CHANGE interrupt somehow:
http://www.ecomodder.com/forum/showt...9907#post19907

04-16-2008, 10:40 AM	#7 (permalink)
dcb needs more cowbell Join Date: Feb 2008 Location: ÿ Posts: 5,038 pimp mobile - '81 suzuki gs 250 t 90 day: 96.29 mpg (US) schnitzel - '01 Volkswagen Golf TDI 90 day: 53.56 mpg (US) Thanks: 158 Thanked 269 Times in 212 Posts	More notes: Software might need to reject pulses that are too short, and/or disable pin 2 interrupts briefly after an injector pulse to filter out oscillations: http://www.ecomodder.com/forum/showt...9906#post19906 Cannot have both LOW and HIGH interrupts on same pin, need to utilize CHANGE interrupt somehow: http://www.ecomodder.com/forum/showt...9907#post19907 __________________ WINDMILLS DO NOT WORK THAT WAY!!!