|
Smooth Wheel Covers
I've been working on a way to smooth my Alloys.
Brucey taped then PlasticDip' his taped alloys. He held up very well.
I've been wondering if I use tape to seal up the holes, could I use a two part casting epoxy to make a smooth wheel cover. The only question still comes down to attachment to the wheel. I was considing drilling the plastic cap and anchoring it to the wheel using 5 or 10 zip ties (ten spoke alloys).
I'm just wondering if anyone on the boards has experimented with the two part epoxies and how well it held up over time.
-Z
__________________
|