Hi!
I'm asking a very open question here, obviously - but...
I have in mind a conversion for a 60s car (the Hillman Imp).
The kerb weight for the car is quoted at around 750kg (100 more than an Austin Mini, but a prettier car IMO) - plus is also rear engined/rwd which suits my driving
style better
Several Imp owners have converted their cars to bike engined high-revved speed-machines (keeping the Imp's transaxle) - but I would like to get a vehicle that is designed primarily for efficiency whilst keeping the old-school looks intact (though this may hurt the aerodynamics).
Imp engine - 37.0 bhp @4800 rpm. Torque. 67.0Nm(49 lbft) @2600 rpm
Thinking:
BMW R850 Boxer engine - produces 57 lbft , 70 bhp
Oilhead/air cooling could cause problems, but Imp has rad in back, air drawn from under car (messy). Would keep Imp's diff/ section of transaxle casting (or equivalent).
Interested in how difficult it would be to 'de-tune' for lower BHP, remapped for good MPG.
I have a gut feeling that a low-slung torquey boxer engine has plenty of potential for good thermal efficiency, plus breathing is not hurt so bad.
Or for really ambitious build
R1200GS - with 85 lbft 100bhp
- converted cam lobes for Atkinson cycle with Mild hybrid e-motor/batteries combo.
Has anyone any experience using these motors for economy? Is it a good starting unit?
Note - being all Ally the Imp's engine/tranaxle comes in at around 70Kg as standard. I can's see the point in replacing it with anything heavier without a very good reason.